Farm Equipment - WANTED: Clamp-on dual hardware

Print Page | Close Window

WANTED: Clamp-on dual hardware

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9848
Printed Date: 21 Jan 2025 at 6:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WANTED: Clamp-on dual hardware

Posted By: Michael (WI)
Subject: WANTED: Clamp-on dual hardware
Date Posted: 21 Mar 2010 at 9:22pm

I just bought a set of duals yesterday at the local consignment auction and unfortunately they came without any hardware. I bought them for our 8030 which has 20.8-38 radials on non-power shift wheels. As a side note the duals are bias ply with about 25% tread and the main radials are about 75%, I hope it works out ok mixing types of tires. Anyway, for lack of a better term, I would call these duals a pipe-rail style. They are similar to a "T" rail only they have a pipe running around the inner circumference of the rim. Since there are 16 lugs mounting lugs on the tractor rims I was planning on using 8 dual clamps per side. What I am looking for then is a total of 16 clamps with, 3/4" threaded eyelets for the tractor rims and if possible 18" long hook rods. I am located in northeast Wisconsin and would prefer to pick-up if possible. Thank you for the help. Mike

Replies:

Posted By: Dale Hardtke
Date Posted: 21 Mar 2010 at 9:42pm

Michael: I have Hardware to attach band duals, eyelets and clamping hook rods. I'm not sure what a pipe-rail style is. Dale @ (262) 719 3552 Watertown Wi.