Off-color disc parts needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9683
Printed Date: 21 Jan 2025 at 6:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Off-color disc parts needed
Posted By: Keith inMN
Subject: Off-color disc parts needed
Date Posted: 18 Mar 2010 at 6:53pm
|
I need a part for a JD disk or contact info for a salvage yard that might have the part.
I need a spool or spacer for the axle, where one of the hanger clamps mount.
The cast in part # is B13889B. It is 8 1/4" long. The large end is 4 1/2" outside diameter. The small end is 3 3/4" diameter. The middle is 2" diameter and about 3 5/8" between the flanges. The axle is 1 1/8" square but the spool I.D. is round.
Any help is appreciated.
Hopefully the pictures attach.
   |
Replies:
Posted By: Rawleigh
Date Posted: 19 Mar 2010 at 10:19am
|
Try Agri Supply: http://www.agrisupply.com/category.asp_Q_ipp_E_0499_A_t_E_c_A_sb_E_0_A_action_E_showall_A_c_E_4500009 - http://www.agrisupply.com/category.asp_Q_ipp_E_0499_A_t_E_c_A_sb_E_0_A_action_E_showall_A_c_E_4500009 |
Posted By: Keith inMN
Date Posted: 19 Mar 2010 at 5:25pm
|
Thanks for the link. I searched their site and no luck. This model must not have been made for very long. Most salvage places don't have any parts and most aftermarket suppliers don't bother to make these parts. I'm hoping someone knows of a good salvage yard or knows of a disk parked in the weeds that can be cannibalized to keep another one functional. It looks like the easiest thing to look for is the length of 8 1/4 inches.
|
Posted By: Tim in NC
Date Posted: 19 Mar 2010 at 6:12pm
|
Wow, $120.00 from mother Deere! |
Posted By: CTuckerNWIL
Date Posted: 19 Mar 2010 at 6:34pm
|
Maybe you could buy a chunk of cast iron 4 1/2" OD by 8 1/2"" long and chuck it up in a lathe, make some chips and you'ld be in business.It would cost you more than $120 if you hired it done I'm sure. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Darrell G (MN)
Date Posted: 19 Mar 2010 at 7:08pm
| Keith there used to be a large boneyard south of Long Prairie that had a lot of old disc's out back, where in central MN are you located at? |
Posted By: Keith inMN
Date Posted: 21 Mar 2010 at 10:35am
|
Darrell,
I'm located near New Prague. Do you have a phone number for the Long Prairie yard?
I've called Larsons/Cambridge, Hofland, Gotvold, Darwin and a couple others I can't remember at the moment. I must have a real odd duck with the 8 1/4" spacers. Everyone has loads of the 7 1/2" parts.
Thanks for any help.
|
Posted By: Rawleigh
Date Posted: 22 Mar 2010 at 9:49am
Just make it out of steel. |
CTuckerNWIL wrote:Posted By: Rawleigh
Date Posted: 22 Mar 2010 at 9:49am
| Did you try Shoup? |