D17 hydraulic oil change question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9546
Printed Date: 20 Jan 2025 at 10:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 hydraulic oil change question
Posted By: AllisFreak MN
Subject: D17 hydraulic oil change question
Date Posted: 15 Mar 2010 at 8:33pm
I have a question about a D17 III. When you change hydraulic oil is there just one plug to remove or two? My owners manual is for a series 1 and it shows the filler neck in a different location than mine. Is the power director fluid in the same compartment or is that separate?
Thanks.
-------------
'49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2
|
Replies:
Posted By: DrAllis
Date Posted: 16 Mar 2010 at 6:38am
|
On a series 3, the compartments are combined and there are two drain plugs but one fill hole/dipstick to the left of the gearshift. Both plugs take a 1 1/8" wrench...one underneath the clutch pedal and the other on the bottom of the hydraulic pump sump. Refill with 22 quarts of hydraulic oil. These fill very slowly and then you'll have to start the engine and let it idle (maybe even with the front wheels downhill) for a few minutes before the oil can make it's way forward to the pump compartment. Change the filter also.
|
Posted By: AllisFreak MN
Date Posted: 16 Mar 2010 at 8:45pm
Thanks Doc.
-------------
'49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2
|
|