Brian Morrison
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=95292
Printed Date: 23 Nov 2024 at 2:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Brian Morrison
Posted By: mgburchard
Subject: Brian Morrison
Date Posted: 18 Sep 2014 at 7:24pm
| Anybody got a number to contact him. Just saw him beat two allis tractors that the owners said Marty nelson built by 56 feet. He beat a turbo diesel 45 and a brads case also. He must be the guy us allis owners need to get to build engines seeing how the internet builder wifi isn't showing to good |
Replies:
Posted By: blue924.9
Date Posted: 19 Sep 2014 at 8:54am
|
800-799-7233, talked to him just the other day about doing a cam, he has good turnout bout a week from getting it to shipped back ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: wi50
Date Posted: 19 Sep 2014 at 10:52am
|
Aw spankey, you still butthurt from the camshaft thread. Or did you open up your copy of the country's premier pulling magazine "The Puller" and see my picture in there a couple times taking top honors? Please fill us in as to who I allegedly built these engines for? You're lying again, where's the Gleason..... ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mgburchard
Date Posted: 19 Sep 2014 at 11:00am
| WiFi its a farther and son team. Brad told them they should have talk to Brian before wasting money. Its no doubt you built them cause they run like they need a power adder ,like nitrous bottle on your WC or turbos like on your case . |
Posted By: ACFarmer
Date Posted: 19 Sep 2014 at 11:20am
|
Why is this troll still on here? ------------- Making A living everyday farming with and working on Allis Equipment |
Posted By: mgburchard
Date Posted: 19 Sep 2014 at 12:08pm
| You tube ac nightmare 1 to watch |
Posted By: Butch(OH)
Date Posted: 19 Sep 2014 at 7:15pm
For the same reason people liked to watch Dumb and Dumber
|
ACFarmer wrote:Posted By: wi50
Date Posted: 20 Sep 2014 at 11:55am
Because the tn scud blew up so he's back to drinking and making up stories. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mgburchard
Date Posted: 20 Sep 2014 at 9:47pm
| Nope no stories here other than Brian kicking motors built by you tale and guys being aggrevated about the performance of their engines. |
Posted By: O.P.S. Heads
Date Posted: 20 Sep 2014 at 10:04pm
|
Please post the link so we can all see this tractor. I searched under "AC nightmare" and came up with nothing. If this is a low gear class I will laugh out loud. Interesting you can't post your own work being better than Marty's. Gotta find somebody else's work - if that is in fact the case. That would be an admission of defeat for you. Lots of holes in this story so far. |
Posted By: mgburchard
Date Posted: 21 Sep 2014 at 3:07pm
| You tube ac nightmare 1 and don't forget the 1 this time lol. Since you go by ops heads I assume you do cylinder head work . you can see Mitch's cylinder head work in this months edition of antique pulling magazine . I bought a tractor me and Mitch. Got back with it this morning from steward Illinois . I like to get Brian to build it so I wouldn't be disappointed in it like the farther and son that had the internet builder build. |
Posted By: cranky
Date Posted: 21 Sep 2014 at 4:35pm
| what is the purpose of this post? why don't you build the engine yourself and enjoy the results of the competition. |
Posted By: mgburchard
Date Posted: 21 Sep 2014 at 5:58pm
| Do you know Brian cranky ? No one has been able to post any info to get in touch with him. He has to be one heck of a builder to beat two nelson built engines . I mean this forum holds nelson as the ultimate builder and now Brian comes along like jack and the bean stalk ,killing the giant by 56 feet. |
Posted By: cranky
Date Posted: 21 Sep 2014 at 6:12pm
| to be honest I do not know anyone nor have I met anyone in recent years on the pulling forum.it should not be very hard to find info about brian since he is involved in tractor pulling.i am surprised you would consider buying engines since you guys have been active building engines for years and are so equipped to do so.what is the tractor model you just purchased and what class do you intend to compete in? can you share some basic engine specs with us ? |
Posted By: mgburchard
Date Posted: 21 Sep 2014 at 7:45pm
| Well everyone on here is so convincing that my friend Mitch couldn't build a engine that was capable of beating WiFi the internet builder so I was looking at getting in touch with Brian cause he obviously can if nothing else send kudos to him for doing so |
Posted By: wi50
Date Posted: 21 Sep 2014 at 8:36pm
|
This is quite the fairy tale going on here. Surely I'd rember building 2 engines for a father and son team....did I build these complete? I bet they bought them "turn key and timed by ear" The only true part is your above statement that everyone is convinced that Mitch can't build an engine. How do you expect to convince people of your abilities by making up lies? Let's start with the Gleason and the 5 highly skilled employees you claimed to have. I read last winter in a post made by pankey himself, not his alias that he was going to start boring blocks for his boys pulling tractor and have them an engine to run.....you fail your kids the promise you made on this very forum? Or just making small talk and lies? I can't imagine why people like Hudsonator told you to get lost in the camshaft thread, and why they call you a troll here. Have a nice evening, keep the lies coming....however I don't lie, and that's why people respect me. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mgburchard
Date Posted: 21 Sep 2014 at 8:41pm
| Yep fairy tale is Marty doesn't build any loosing engines . he has amnesia on builds that loose but quickly tags his name on winners . surprised he isn't saying he builds Brian's . |
Posted By: wi50
Date Posted: 22 Sep 2014 at 9:35am
I rembered reading a post somewhere where a fella had posted a picture of his dealings with pankey. I thought I'd show you this pic mgbuchard, you'll make a wise choice staying away from pankey machine and useing anyone else......now if I could just fine one of some hacked up all thread he was so proud of. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: wi50
Date Posted: 22 Sep 2014 at 9:38am
|
Is that one of those Buda rods, or a Farmall C? Just curious. Did it rattle a little bit, I see the rod bearings are spun. Detonation knock them out? Or was it just not enough locking tab to bite into the cap? My guess here would be detonation, due to the spun bearings and broken piston....."timed by ear"..... ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: O.P.S. Heads
Date Posted: 22 Sep 2014 at 10:55am
| Has anyone found this video yet? |
Posted By: Larry(OH)
Date Posted: 22 Sep 2014 at 11:04am
|
http://www.youtube.com/watch?v=_EamFt3CeiA" rel="nofollow - http://www.youtube.com/watch?v=_EamFt3CeiA
I had to turn my monitor sideways to see it...... ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: O.P.S. Heads
Date Posted: 22 Sep 2014 at 12:16pm
|
The tractor runs nice. The video doesn't tell us anything. I thought maybe it would be of the whole class and perhaps it would scroll the distances and names at the end of the video like some do. You put a lot of effort into picking fights with Marty. That's all this post is intended to do. Maybe you should turn all of your effort toward something more productive. |
Posted By: mgburchard
Date Posted: 22 Sep 2014 at 4:10pm
|
Posted By: mgburchard
Date Posted: 22 Sep 2014 at 5:22pm
| WiFi engines didn't only loose to Brian they also lost to nick and a case engine builder who is friends with Mitch that goes by Mel on yt tractor |
Posted By: wi50
Date Posted: 22 Sep 2014 at 5:54pm
|
Would you be able to provide the names of these allegid pullers whom in supplied these engines to? Did I build them turn key? Or did they simply buy a part like a camshaft or carburetor from me.....or are you just on one of your jealous fits on the edge of another mental breakdown and making things up again? Carefully, last time you lost it they gave you the boot and blocked your IP addresses. I wouldn't want you to have to get another new phone again. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: cotncrzy
Date Posted: 23 Sep 2014 at 6:04am
|
WI50 can set up an engine, I can testify to that. I am hooked most any summer weekend somewhere down here, come compare if you dare! ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |
Posted By: mgburchard
Date Posted: 23 Sep 2014 at 10:25am
| Mitch says dont go up the east coast stay in middle tn |
Posted By: blue924.9
Date Posted: 23 Sep 2014 at 10:44am
|
anybody try his number, tried to get ahold of him about my cam but got an error message trying to see if its him or me ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: wi50
Date Posted: 23 Sep 2014 at 11:26am
That's a wise move on your part. I hear cottncrazy has been kickin all these 400+ cube engines around. With pank bragging about his shop and 5 highly skilled employees, all the engines he builds, a good share of cottncrazy's victories would be humiliating for your friend mitch. After all,cotton crazy has been hitting the most popular pulls in tn and the south.....and there's plenty of documentation. What would be even more humiliating is if you actually knew what was in cottn's engine..... ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mgburchard
Date Posted: 23 Sep 2014 at 2:32pm
| Wifi and cotton Brian has done beat two of wifi builds i dont think he is the one who needs to spend the money driving from va to middle tn to spank another. If you want to prove something go up east cost and take a spaking from ac nightmare . Ps no 400 cube engines in mid tn 4.5 bores is all that is over there. Cotton go get beat by ac nightmare and defend wifi |
Posted By: wi50
Date Posted: 23 Sep 2014 at 3:31pm
|
So I've asked for names, Mike has asked for some documentation. You haven't been able to provide any to us. It boils down to a case of your word against mine.....there's more than a few loopholes in your story and I know who I sell what to. It wouldn't make much sense for you to say I built someone an engine, when I simply sold them a carbuerator or a camshaft, it also wouldn't make much sense if someone bought some parts for a 3 mph or division 2 engine to compare it to one built for no pace or a division 4 type engine. It also raises red flag when you say I built 2 engines for a father and son, that right there tells me you are caught in an outright lithat would be like comparing my super stock and your stock JD A....while you fight to find a horsepower or two, I'm measureing horsepower in the thousands hoping to hone in on couple hundred increments. In case you can't understand what you're reading here pank, I'm saying you're lying, its a nice fairy tail, but it simply isn't true...how many other things do you lie about? If your story were true, you'd be able to provide information, if it were true and you wanted to help other people, you'd provide information to help them out and save their money. So either you're lying or you aren't looking out for your fellow pullers. That being you have fellow pullers, which is questionable. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: Butch(OH)
Date Posted: 23 Sep 2014 at 7:36pm
That number is the National Domestic Offense Hot Line,
 does this brian guy work days there? LOL |
Posted By: mgburchard
Date Posted: 23 Sep 2014 at 8:02pm
| WiFi you know the names of the Italian looking farther and son you built for I don't . |
Posted By: blue924.9
Date Posted: 24 Sep 2014 at 8:56am
oh yeah, he is a real regular
couldnt find a number for helping people who think they build engines and own a shop ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: cotncrzy
Date Posted: 25 Sep 2014 at 6:52am
|
Hey, no doubt there is tractors out there that are way more HP then I am. The thing is tractor pulling, it's not a dyno, its a traction game. Reading track conditions, and weighting the tractor properly is the key along with a driver thet knows how to drive. Haveing enough power when its needed is great but a tractor with just enough power weighted properly at 4 mph will beat you every time. I sounded a little rude in my last post, I apologise for that. I dont know Mitch's work, therefore I cant testify( or defend, as you put it). However, I do know WI's work and I will testify that I am 100% satisified. Along with it he is a great guy that will take the time to help, give suggestions, and realy make you understand what he is talking about. I am sure Mitch is the same I haven't had the opertunity to see. We as a family enjoy this sport, we dont do it for the glory we do it for fun. I have made many friends pulling thst will last a lifetime. I am not looking to go BEAT someone to prove a point, if it happens it happens. ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |
Posted By: mgburchard
Date Posted: 25 Sep 2014 at 8:55am
| Cotton your right more to it than just engine . I also realize your happy with your tractor in the limited area of travels you pull in . with that being said when you get board and decide to broading your area of travel then you broaden the amount of competition as well. It also looks like if you found more competition than you can handle that WiFi gave you a excuse in small cubic inches as well . |
Posted By: Butch(OH)
Date Posted: 25 Sep 2014 at 10:02am
Again Coton shows his class act And again Pank,, you show your posterior |
Posted By: cotncrzy
Date Posted: 25 Sep 2014 at 1:40pm
|
I GUESS A SECOND PLACE IN TUNICA, MS AT THE SOUTHERN NATIONALS ISNT BROAD ENOUGH? TOOK SECOND PLACE BEHIND MR HADEN GIBSON, WE MISSED THE WEIGHT A BIT, BUT PULLING AGAINST AN OLE PRO I WAS SATISIFIED! GOOD LORD WILLING, AND THE CROPS ARE OUT WE WILL BE IN WHITE PINE IN 2014 WITH MY "SMALL" CUBIC INCH ENGINE.... LOL; ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |
Posted By: WF owner
Date Posted: 25 Sep 2014 at 7:22pm
When I click on this link, it gives a message that the video has been removed. |
Posted By: NickT(Ky)
Date Posted: 25 Sep 2014 at 8:24pm
| Video has been removed by the user!!?? |
Posted By: wi50
Date Posted: 25 Sep 2014 at 8:54pm
|
It was a nice running tractor in the video, fairly light weight class, nose on the ground so it didn't load the rear tire's. Looked to be 4 mph pace, maybe 5 as the flagman was able to keep up walking along side. Similar to a division 3 NATPA type of class I'd say. I'm not sure why pankey was so impressed that they want to buy an engine like it, but whatever trips a fellas trigger I guess. I'd imagine when you're unable to do much yourself, you're impressed with everything else is the impression I get from panks obsession. Like I say, nice running rig, but so are a lot of tractors. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mgburchard
Date Posted: 26 Sep 2014 at 5:11pm
| Oh its impressive that it got by two of wifis engines so easy by 56 feet second place was a turbo all is 20 feet behind it then the case of Peters behind it. |
Posted By: mgburchard
Date Posted: 26 Sep 2014 at 5:16pm
|
Posted By: mgburchard
Date Posted: 26 Sep 2014 at 5:22pm
| Anyone know if tom lockhard has debuted his all is at a pull this season yet? |
Posted By: WF owner
Date Posted: 26 Sep 2014 at 7:01pm
|
Is there a way to block someone on this forum? 99.9% of the people that post on here have something positive to say or something to help someone. Unfortunately, there are a few (actually I can only think of one) that add nothing positive and do nothing but promote controversy, which will end up bothering some of the positive posters into withdrawing and not posting. I have seen it on other forums. I thought it was finished on here a couple years ago when one member was barred, but it's rearing it's ugly head again. |
Posted By: mgburchard
Date Posted: 27 Sep 2014 at 9:39am
| Video under name of Tyler Kilgore shows ac nightmare 1 nicks 45 diesel brad peters case and Dwayne . different pull during day |
Posted By: wi50
Date Posted: 27 Sep 2014 at 11:52am
Italian looking fellas, well I never trust anyone who's last name ends in a vowl. Would you provide a date and location of this imaginary pull, maybe a link? Let me guess, no information, no video, no names, no documentation. Did these mysterious it all I an looking felas steal your Gleason too? ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mgburchard
Date Posted: 27 Sep 2014 at 6:06pm
| WiFi the pull your motors was at it was dark like first video of Brian . they weren't at that day Saturday open pull I guess they were to embarrassed . YouTube tyler Kilgore you will see Saturday pull brad,nick Brian ,Dwayne . brads case victorious in Saturdays pull |
Posted By: cotncrzy
Date Posted: 28 Sep 2014 at 10:57am
|
I just don't understand???? ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |
Posted By: Juiceman
Date Posted: 28 Sep 2014 at 4:47pm
| Everybody can say what they want, but along with cotncrazy, we have had a lot of fun with a Marty Nelson built engine. Our tractor is very competitive 3.5 to 4mph div 2 tractor up to 5500lbs. Its double of what it usta be i'll tell ya that. Last weekend the track wasnt the best, so i ran the 5500 3.5mph in 2nd gear no problem low rpm. While under 300ci. Lol |
Posted By: wi50
Date Posted: 30 Sep 2014 at 9:20pm
So you seen him beat these engines (that I didn't build). Then you say you were there on Friday night, but on the Saturday pull they weren't there, but the videos were taken, by your statements in your posts. Well the videos you are referring to are from Fawn Grove Pa.... That's. Few states away from you, and it was a Sunday, day pull. Your story has some holes in it here pank. Just saying next time you plan to lie, at least do a better job of it. I keep in contact with lots of people who I do work for, there are no people that I built 2 engines for. Sorry to burst your bubble, secondly, they weren't at the pull. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: Steve in NJ
Date Posted: 01 Oct 2014 at 8:03am
|
Now Marty, that's not a nice statement to make about peoples names ending in a vowel not being trustworthy... I resemble that! Leave us I-talians outta' that. I happen to know a lot of trustworthy I-talians. Just don't piss em' off cause' ya might not make yer' next birthday. Nice people tho otherwise... LOL! Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |