Pulling Forum - CA Engine Question

Print Page | Close Window

CA Engine Question

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=94569
Printed Date: 22 Nov 2024 at 10:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA Engine Question

Posted By: 1955allisca
Subject: CA Engine Question
Date Posted: 01 Sep 2014 at 4:58pm

Has anyone ever took the piston and sleeves out and just put big pistons in a CA, is it possible? And if so what size pistons does it take?

Replies:

Posted By: dgerth
Date Posted: 02 Sep 2014 at 10:14pm

For starters, It's a wet sleeve motor so your limited quite a bit there and I am not aware of an over-bore kit for a 125 motor. You might want to start with a 149 motor or maybe a 160 if you can find one. I am not sure what you mean by big pistons either, I guess refer to the previous mentioned limitations.