Print Page | Close Window

45 Nelson muffler question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9387
Printed Date: 20 Jan 2025 at 1:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 45 Nelson muffler question
Posted By: Larry(OH)
Subject: 45 Nelson muffler question
Date Posted: 12 Mar 2010 at 8:58pm
Just replace manifold gaskets on my 45 and it has a Nelson on it.  This is the first one I've had personally and have a question about it. Is there some sort of a gasket that would go into bottom of it or anything like that.  When I set it down on and it "bottoms" out, the holes are about 1/2 a hole low so I have to Raise it to get bolts in.  I notice that it still puffs exhaust downward around the bottom of the muffler.  If I take bolts out and let bottom out, it does not blow exhaust out.  Thanks, LArry

-------------
'40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie

*ALLIS EXPRESS contact*

I can explain it to you, BUT I cannot understand it for you!!



Replies:
Posted By: Don(MO)
Date Posted: 13 Mar 2010 at 8:35am
Larry, I have not seen that before on a Nelson muffler. I don't know of a gasket for one. 
You might just slot the bolt holes out on the muffler a little to get it down in the manifold.
Don


-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.



Posted By: Burgie
Date Posted: 13 Mar 2010 at 10:24am
Larry, Do you think someone put a CA muffler on it??

-------------
"Burgie"


Posted By: Larry(OH)
Date Posted: 13 Mar 2010 at 2:23pm
I'll look for a number on it and see.  I think the guy i bought the tractor from put it on and got it from the AGCO dealer in Ashland.  Slotting the holes would work ok also I guess

-------------
'40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie

*ALLIS EXPRESS contact*

I can explain it to you, BUT I cannot understand it for you!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net