Farm Equipment - Oil Fill Tube 56 CA

Print Page | Close Window

Oil Fill Tube 56 CA

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9310
Printed Date: 20 Jan 2025 at 10:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Oil Fill Tube 56 CA

Posted By: Mike(GA)
Subject: Oil Fill Tube 56 CA
Date Posted: 11 Mar 2010 at 2:05pm

The fill tube on the valve cover on my 56 CA is loose. How are they held on? I have not removed the valve cover to see what the problem is yet.

Replies:

Posted By: Larry in OK
Date Posted: 11 Mar 2010 at 2:39pm

I've recently had mine off and it appears to be pressed and/or welded. Mine is very solid.

Posted By: Dakota Dave
Date Posted: 11 Mar 2010 at 3:18pm

I took mine off last fall and welded it inside. it looks like it was pressed in but mine got loose enoght to leak. its been great since welding.

Posted By: Mike(GA)
Date Posted: 11 Mar 2010 at 6:10pm

Thank you for responding. I will have mine welded.

Posted By: Dick L
Date Posted: 11 Mar 2010 at 6:45pm

I have had a couple loose. They are just stamped in. I pressed them in place square and spot brazed them in place in four places on the inside. If you can't get them tight I would brazed them all the way around to keep them from seeping oil.