Garden Tractors - need some help

Print Page | Close Window

need some help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=92968
Printed Date: 03 Nov 2025 at 10:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need some help

Posted By: Ronnie
Subject: need some help
Date Posted: 27 Jul 2014 at 6:29pm

I have a 3416 hydro that I need to replace the seal and bearing on the pump drive shafts and I'm having no luck can someone tell me what the part number is for the bearing and for the seal. thanks

Replies:

Posted By: Steve in NJ
Date Posted: 01 Aug 2014 at 7:08am

Usually bearings have numbers stamped on them. On occasions, some seals will have an ID or production number on them where they can be interchanged over. Do you have the bearing and seal out? If there is no number on either, a bearing shop should be able to ID both by measuring up the sizes, and then interchanging the sizes to a number out of their books.
Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: Ronnie
Date Posted: 01 Aug 2014 at 7:39am

I got the seal and bearing out I called my local ac dealer and that told me the bearing was obsolete and they had a hard time finding the seal. I found a bearing at Napa. Thanks for the reply.