Farm Equipment - 8050 Allis

Print Page | Close Window

8050 Allis

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9268
Printed Date: 20 Jan 2025 at 11:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8050 Allis

Posted By: Cummins
Subject: 8050 Allis
Date Posted: 10 Mar 2010 at 5:15pm

Do you guys know how to turn an injection pump up on an 8050 Allis? thanks

Replies:

Posted By: DrAllis
Date Posted: 11 Mar 2010 at 7:07am

Really shouldn't be done without a dyno to verify the beginning and ending results. Remove the four bolts holding on the pump governor cover with a 7/16" socket. Locate the horizontal adjusting screw under the cover. Loosen the jam nut (7/16" open end wrench) and turn the screw with a flat blade svrewdriver "out" (counter-clockwise)) 1/2 turn and reset the jam nut. Re-install the cover.