Farm Equipment - need plow shares

Print Page | Close Window

need plow shares

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9208
Printed Date: 21 Jan 2025 at 6:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need plow shares

Posted By: JayIN
Subject: need plow shares
Date Posted: 09 Mar 2010 at 10:30am

I need 2 plow shares for a 52 plow. price and shipping to 47240? thanks!

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Replies:

Posted By: ALinIL
Date Posted: 09 Mar 2010 at 10:40am

Jay - If you can't find what you need try - AL

http://www.balsters.net/plowshares.html - http://www.balsters.net/plowshares.html

Posted By: ALinIL
Date Posted: 09 Mar 2010 at 10:42am

Bump also

http://crescentforge.com/products/ConventionalPlowShare/ConventionalPlowShare.htm - http://crescentforge.com/products/ConventionalPlowShare/ConventionalPlowShare.htm

Posted By: Gerald J.
Date Posted: 09 Mar 2010 at 1:31pm

ITs insufficient information to say plow shares for 52 plow. In AC that means the plow FRAME, but not the bottom. Bottoms were in a separate book and many bottoms customized for different soil types were available. You have to fine a part number on a bottom part (frog, share, moldboard, shin, or maybe landside though landsides were used on many bottoms) and from that the plow bottom can be identified, and then the proper share identified.

Gerald J.

Posted By: Gerald J.
Date Posted: 09 Mar 2010 at 1:32pm

FIND not fine a plart NUMBER!

Gerald J.

Posted By: JayIN
Date Posted: 09 Mar 2010 at 1:52pm

yeah, thats right, I forgot. Ill take the tarp off it when I get home and look for some numbers. Thanks!

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Posted By: acdeerboy123
Date Posted: 09 Mar 2010 at 2:40pm

no more balsters, Less died this past winter

Posted By: Gerald J.
Date Posted: 09 Mar 2010 at 2:45pm

Keep in mind that the plow bottoms book lists from 6 to a dozen plow shares for a particular bottom, depending on plow width (12, 14, 16) and the ground. Some are short some are long. Some are used for a couple widths. Some have point turned down for deeper suck, some don't. Some are made of steel, some of chilled iron, some a combination. So are toughened for rocky ground, some aren't. Some have a special hard surface to wear longer, some have a soft center to handle impact better. Lots of variations, most of which won't be available today.

Gerald J.

Posted By: BrettPhillips
Date Posted: 09 Mar 2010 at 3:53pm

Sorry to hear that Balster's has closed, especially due to death. I would give my left arm to walk through that building. I drove past it twice, but there was never anyone around to talk to. Will there be an auction?

Posted By: skipwelte
Date Posted: 09 Mar 2010 at 4:22pm

plart NUMBER Gerald?? dont ya just hate it when that happens???!!!!

Posted By: snowman(MI)
Date Posted: 09 Mar 2010 at 4:30pm

Also in need of 2 shares for a #52 plow with 12" bottoms

Will look for a part number on our worn set.

Posted By: Gerald J.
Date Posted: 09 Mar 2010 at 5:21pm

Skip, its happening more often. I don't appreciate this gray on black entry screen. I may have to tell my browser to use my own colors for this forum so I can see ALL the text.

Gerald

Posted By: norm [ind]
Date Posted: 09 Mar 2010 at 7:35pm

PUT NEW NOSES ON THE POINTS HAVE REPAIRED MANY

Posted By: Dusty MI
Date Posted: 10 Mar 2010 at 6:13am

I think I have a book that lists the numbers for the G plow points. I'll post them when I get home, maybe in a couple of weeks.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Posted By: Dusty MI
Date Posted: 20 Mar 2010 at 6:35pm

These are for the G #24, 124, & 325 plow. The 24 & 124 both use the part # 309141 frog. The #325 uses the part # 319721 frog.

The G plows are 12".

S.C.S. Soft Center Steel

S.S Sold Steel

N.C. Narrow Cut

D.S. Deep Suck

#24 plow.

Part #

309414 frog

308860 S.C.S.

308863 S.S.

309270 N.C., S.S., stoney

308866 Chilled Iron

309235 N.C., D.S.

309234 N.C., D.S. stoney

#124 plow

309141 frog

308880 N.C., D.S.

308860 S.S.S.

308863 S.S.

308866 Chilled Iron

309235 N.C,D.S.

309270 N.C.,D.S.,S.S. stoney

309234 N.C.,D.S. stoney, Chilled Iron

309262 N.C.,D.S.,S.S., 14"

309271 N.C.,D.S., stoney 14"

309263 N.C.,D.S., Chilled Iron 14"

308887 Chilled Iron

309264 N.C.,D.S. stoney, Chilled Iron

#235 plow

319721 frog

308800 S.C.

308803 S.S.

309245 D.S.,S.S.

They must have used some 14" points/shares on the G 12" plows.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"