Farm Equipment - D-17 Brakes

Print Page | Close Window

D-17 Brakes

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9182
Printed Date: 01 Feb 2025 at 4:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-17 Brakes

Posted By: Jeff Z. NY
Subject: D-17 Brakes
Date Posted: 08 Mar 2010 at 7:54pm

What are some methods some of you have done to remove pin on the brakes?

Replies:

Posted By: skipwelte
Date Posted: 09 Mar 2010 at 5:07pm

Lots of heat with the blue wrench in the axle housing where the pin extends to the outside. the ones that arent to tight you can get a puller on the end. The real, real bad ones come out in short chunks, cut em with the blue wrench.

Posted By: AndyinWI
Date Posted: 09 Mar 2010 at 6:08pm

i have drilled and tapped the pin to 5/8 then used a short piece of pipe that was a little bigger diameter than the pin, 5/8 bolt, and a big washer, then stuck the bolt through the pipe and screwed the bolt into the pin, came right out with an impact wrench.

Hope this helps,

Andy

Posted By: norm [ind]
Date Posted: 09 Mar 2010 at 7:30pm

lots of blaster aN SOME HEAT ON REAR HSG. 1-574-342-4545

WE HAVE A PULLER DO NOT HURRY IT