Farm Equipment - WTB 7080 parts

Print Page | Close Window

WTB 7080 parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9176
Printed Date: 20 Jan 2025 at 10:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WTB 7080 parts

Posted By: SCPAAndy
Subject: WTB 7080 parts
Date Posted: 08 Mar 2010 at 6:27pm

I am searching for the following for my 7080:

-rear 38" rim centers and wedge locks

-electric mirrors and switch

Its not much of a list but what i'm in the market for right now. The electric mirrors and switch won't be a big deal but the rim parts are exclusive to 7080's according to Agco parts online. I didn't take the time to check other manufacturers yet just seeing what others may have first. Thanks- Andy

Replies:

Posted By: tnac
Date Posted: 08 Mar 2010 at 6:46pm

I know where there is a good used 7080 near me someone can buy worth the money. New tires and duals. I'd say around 7500 or 8, I can find out if anyone is interested

Posted By: Dale Hardtke
Date Posted: 08 Mar 2010 at 10:12pm

Yes: the wheel castings are exclusive to the 7080, but i do believe that most any two piece wedge, 38" Allis Chalmers wheel casting will work if you have the axle wedges for the 4.00" axle. The 7080 38" wheel castings are thicker and heavier (approx 600#) than any other 38" Allis Chalmers wheel casting I've delt with. The wheel rim clamps (both power adjust or double bevel) are the same.

Posted By: Troy
Date Posted: 09 Mar 2010 at 7:04am

i would have some cast centers off of a 7580 i think they are the same axle size, i will check and see. call me if interested, 507 421 0213.

Posted By: Dale Hardtke
Date Posted: 09 Mar 2010 at 7:26am

7580 axle size is 3.75 not 4.00,but the axle wedges should be interchangeable with any two piece wheel casting.

Posted By: Dale Hardtke
Date Posted: 09 Mar 2010 at 7:31am

Opps; that should read > any two piece wedge, wheel casting.<

Posted By: Adam Stratton
Date Posted: 09 Mar 2010 at 4:52pm

If you get that far, I have a set of wedges off of a 7080 that I would sell cheap. I bought the complete wheel setup to put axle mount duals on a 7045, then bought wedges to fit mine. 417-850-4532