Allis G Head
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9159
Printed Date: 20 Jan 2025 at 11:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G Head
Posted By: Morris Hill NC
Subject: Allis G Head
Date Posted: 08 Mar 2010 at 12:02pm
I just finished building a Allis G engine ,Got it timed and running sounds good
about 25 lbs oil pressure gen charging on high and low.
Problem Water seeping out of center head bolt between #2 & #3 sparkplug
I used lock washers on studs and it seems to be leaking at split in washer.
Should I have used a flat washer Or do I have a HEAD problem?
{I know I have A head problem, I am talking about the Tractor}
Thanks
Morris
|
Replies:
Posted By: ac_bowsers
Date Posted: 08 Mar 2010 at 12:49pm
Is that the bolt on the water neck? I just got done with one here and mine started seeping out on the front bolt of the water neck, I was told that was the weak spot on those heads in front of the neck, mine has been repaired there and pressure checked good. I pulled the bolt up and put a dab of form-a-gasket 2 on it and snugged it back up, no leaks now. Try that first, you may have a cylinder head problem. Just my two cents...good luck
-------------
Pine Stock Farm "Home of the ALLIS" 35-WC-36-U-37-UC-47-C-49-G-57-D17-58-D17puller-63-D21-71-210puller-79-7045-83-8070-AA9675-BigTen-B10-310-1300fieldcult-snapcoupler imp.-longhopper blower,signs,etc.
|
Posted By: Dick L
Date Posted: 08 Mar 2010 at 12:51pm
copper washers. That was what was on mine when I disassembled it. I picked up a copper washer assortment a Harbor Freight when they were on sale. I don't remember the cost but seemed like it was only a little bit more than if I had bought a hand full one at time.
|
Posted By: Morris Hill NC
Date Posted: 09 Mar 2010 at 7:23pm
AC Bowser & Dick L
Thanks for the info on G head ,will try washer & sealer.
Thanks againMorris
|
Posted By: GlenninPA
Date Posted: 09 Mar 2010 at 8:29pm
|
Harbor Freight copper washer storehouse $9.99
Handy to have on hand.
|
|