Farm Equipment - loader cylinder

Print Page | Close Window

loader cylinder

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9057
Printed Date: 20 Jan 2025 at 8:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: loader cylinder

Posted By: Dave/cvny
Subject: loader cylinder
Date Posted: 06 Mar 2010 at 4:45pm

I was moving wood this afternoon with the 200 and the loader and in the process I bent a lift cylinder! I don't think I bent the ram but the tube is bent near the top, about 4 or 5 inches. Can it be straightened or do I need to find another one? Any help will be appreciated

Replies:

Posted By: Jack(Ky)
Date Posted: 06 Mar 2010 at 6:53pm

You really can't straighten a tube. We repair a lot cylinders where I work and we just have to put on a new tube when that happens. I would try to find another cyl. but it needs to be basically indentical to the other one in order to work right.JP