Print Page | Close Window

transmission to wheel interlocking

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=86567
Printed Date: 22 Nov 2024 at 7:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: transmission to wheel interlocking
Posted By: EdonBass
Subject: transmission to wheel interlocking
Date Posted: 17 Mar 2014 at 1:02pm
Had Allis-Chalmers Model 916H stuck in frozen mud the other day. Engaged hydrostatic and hear something snap. The rear wheels are no longer engaged into the hydrostatic output shaft. I assume there is some type of shear pin or woodriff key that locks the hydrostatic to the wheels but cannot find a simple diagram to show me how the system works. Anyone have access to such a diagram, drawing, etc. or can explain to me how to proceed before I blindly start disassembling the unit. Any direction here would be appreciated.


Replies:
Posted By: farmtoybuilder
Date Posted: 17 Mar 2014 at 2:33pm
OUCH! If transmission imput shaft is turning, It may have broken the gears in the right hand differential unit! or sheared the key in axle or broke right rear axle tube.  As those are the wear leak links! You could also check the disconnect lever on the rear end also. Here's a link to manual also. 900's are same.
 
http://api.viglink.com/api/click?format=go&jsonp=vglnk_jsonp_13950844069686&key=ef3cb3b45e0149b9e83c984fd2a7bcaf&loc=http%3A%2F%2Fwww.simpletractors.com%2Fclub2%2Ftopic.asp%3FTOPIC_ID%3D138699&v=1&libId=858a8b89-47ce-4680-be0b-4c5910bae0aa&out=http%3A%2F%2Fbsintek.basco.com%2FBriggsDocumentDisplay%2Fdefault.aspx%3Ffilename%3DifDDFO9jwJ9iGclRzOfEP5NRQpe&ref=http%3A%2F%2Fwww.simpletractors.com%2Fclub2%2Fforum.asp%3FFORUM_ID%3D7%26sortfield%3Dlastpost%26sortorder%3D0%26whichpage%3D3&title=2012%20Differential%20Problem%3F%20-%20Talking%20Tractors&txt=http%3A%2F%2Fbsintek.basco.com%2FBriggsDocumentDisplay%2Fdefault.aspx%3Ffilename%3DifDDFO9jwJ9iGclRzOfEP5NRQpe" rel="nofollow - http://api.viglink.com/api/click?format=go&jsonp=vglnk_jsonp_13950844069686&key=ef3cb3b45e0149b9e83c984fd2a7bcaf&loc=http%3A%2F%2Fwww.simpletractors.com%2Fclub2%2Ftopic.asp%3FTOPIC_ID%3D138699&v=1&libId=858a8b89-47ce-4680-be0b-4c5910bae0aa&out=http%3A%2F%2Fbsintek.basco.com%2FBriggsDocumentDisplay%2Fdefault.aspx%3Ffilename%3DifDDFO9jwJ9iGclRzOfEP5NRQpe&ref=http%3A%2F%2Fwww.simpletractors.com%2Fclub2%2Fforum.asp%3FFORUM_ID%3D7%26sortfield%3Dlastpost%26sortorder%3D0%26whichpage%3D3&title=2012%20Differential%20Problem%3F%20-%20Talking%20Tractors&txt=http%3A%2F%2Fbsintek.basco.com%2FBriggsDocumentDisplay%2Fdefault.aspx%3Ffilename%3DifDDFO9jwJ9iGclRzOfEP5NRQpe


-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.   

Posted By: Skunkhome
Date Posted: 17 Mar 2014 at 11:22pm
Unlike the Vickers hydro, there is not a disconnect lever on the back of the Sunstrand transmission but there is a set of check valves on top of the hydro pump that when depressed with the latch allow fluid to bypass the pump for the purpose of pushing the tractor. Make sure the lever is raised and the stems on both those valves are sticking up. Then the lever is raised the valves should pop up when the engine is started. If they are in the right position I suspect you may have snapped the axle tube or broke the differential gears as poster stated above.

Posted By: EdonBass
Date Posted: 19 Mar 2014 at 7:30am
Assuming that it is in the differential (which would make sense) are there parts available on line? Thanks by the way for the diagram. That really helps me understand what I am likely to be dealing with. I am going to start dis-assembly today and it is nice to have pictorial references to help me understand where I am going.

Posted By: EdonBass
Date Posted: 20 Mar 2014 at 1:35pm
Definitely the differential. There are some broken pieces inside. I haven't pulled it apart yet but I suspect that some of the gears are broken. the main gear on the axle does not show any damage but I haven't completely cleaned it yet. Are parts or a rebuilt differential available anywhere for this tractor. It is the later version of the differential from what I can tell. Any help here would be greatly appreciated. Thanks.

Posted By: farmtoybuilder
Date Posted: 20 Mar 2014 at 3:58pm
Parts are available for them. Take you model number and serial number to local Simpicity dealer or Agco and they can order them. Wells Implement and Sandy Lake can help you also. Might check with guys on Simple tractors for good used parts or new also. 
 
http://www.simpletractors.com" rel="nofollow - http://www.simpletractors.com
http://www.sandylakeimp.com/" rel="nofollow - http://www.sandylakeimp.com/
http://www.wellsimplement.com/index.htm" rel="nofollow - http://www.wellsimplement.com/index.htm


-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.   

Posted By: Mikez
Date Posted: 20 Mar 2014 at 10:18pm
Expect it to be pricy. But worth it.


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net