Construction and other equipment

Print Page | Close Window

HD11E Finals Gear

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=86217
Printed Date: 29 Jun 2025 at 4:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD11E Finals Gear

Posted By: Gargoyle
Subject: HD11E Finals Gear
Date Posted: 11 Mar 2014 at 10:45am

I found my clunk.. or rather I found a gear tooth when I removed the finals inspection plate on the right rear.

Based on the tooth size, I'm guessing this is from the intermediate gear or the pinion for that gear. I'll know more after I get it apart.

But I thought I'd check to see if anyone has any gears available, in advance of tearing this all apart.
Is this going to be tough to find?
Serial 8878

Thanks

Replies:

Posted By: Lazyts
Date Posted: 11 Mar 2014 at 12:03pm

Yes

Posted By: Gargoyle
Date Posted: 11 Mar 2014 at 12:22pm

LOL.. short and sweet...

Well, on a good note, it has some good parts, if we end up going that way...

Posted By: DMiller
Date Posted: 11 Mar 2014 at 2:23pm

Get a hold of Zimmerman, see what they have in the yard at Versailles, if theirs is done in then there is always Chartrand in Red Bud IL and other yards with these machines in them.

Posted By: Gargoyle
Date Posted: 11 Mar 2014 at 3:03pm

I forgot about Zimmermans.. I'll give them a call.

Debating with the wife, we are looking at options.
1. Locate a new gear -$
2. Have a service try to repair the old one. -$$
3. Drive dozer as it is, until it busts - not a good idea
4. Find a scrap machine - $$$
5. Buy a new dozer and dig a pond around HD11. Use as water fixture..

While that last one made me laugh, the wife said "don't give up your day job to become a comedian"..

Posted By: Lazyts
Date Posted: 11 Mar 2014 at 3:11pm

Yes, I mean yes, I've got all the gears- some brand new old stock A-C. I'll sell them cheap- they don't fit my 11. Could probably arrange delivery to northeast MO- you know where.

Posted By: gemdozer
Date Posted: 11 Mar 2014 at 3:54pm

I am still have some HD11 parts if I can help

Posted By: Gargoyle
Date Posted: 11 Mar 2014 at 8:36pm

Thanks Gemdozer. I'll see if Lazyts can make this a go first.

If I remember, you are in Oregon????

Posted By: Lazyts
Date Posted: 11 Mar 2014 at 10:26pm

"Je ne crois" Gemdozer is fellow Canadian from near Montreal, Quebec. Eh?

No, I don't know French, but I can pretend online.

Posted By: gemdozer
Date Posted: 12 Mar 2014 at 7:29am

Yes am CANADIAN and am near MONTREAL

Posted By: Gargoyle
Date Posted: 14 Mar 2014 at 5:23pm

My last name is Theriault and I love Red Green, but sadly, south of the border. :P

Posted By: Gargoyle
Date Posted: 27 Mar 2014 at 11:30am

Finally found the culprit.. Final drive pinion shaft...

Posted By: gemdozer
Date Posted: 28 Mar 2014 at 7:16am

I am still have some hd11 final drive pinions

Posted By: Gargoyle
Date Posted: 28 Mar 2014 at 9:24am

Thanks!. Lazyts has one that he is sending.