tires
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=83485
Printed Date: 24 Nov 2024 at 8:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: tires
Posted By: allispuller
Subject: tires
Date Posted: 19 Jan 2014 at 7:46pm
|
Has anyone ever used 16.9x30 long bar short bar tire? I know where there is a good set and was wpndering if they would be worth my time trying.
|
Replies:
Posted By: 2wise4agm
Date Posted: 19 Jan 2014 at 8:28pm
I've never used them, but I've heard pullers around here talk about them. Only bad things to say about them
|
Posted By: BennyLumpkin
Date Posted: 19 Jan 2014 at 8:39pm
Long bar short bar tires aren't any good for pulling.....
-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110
|
Posted By: DougG
Date Posted: 20 Jan 2014 at 3:23am
|
They are the worst possible tire out there for pulling or farming!
|
Posted By: XT in pa
Date Posted: 20 Jan 2014 at 5:01am
We have a set of Armstrong 18x38 on 18 inch rims. They are real sharp from road wear. They are on a 806 right now and do awesome. Better the more weight you put to them. I had them on the xt before and had to drop a gear cause they hooked up so good. Other results may very. I'd buy another set of them for sure.
-------------
190XT,D17and 7045
|
Posted By: allispuller
Date Posted: 20 Jan 2014 at 5:14pm
|
What tire would you guy suggest for a 3.5 mph class
|
Posted By: 2wise4agm
Date Posted: 20 Jan 2014 at 6:01pm
Posted By: allispuller
Date Posted: 20 Jan 2014 at 6:14pm
|
I havent seen anything that says i cant run radials
|
Posted By: DrAllis
Date Posted: 20 Jan 2014 at 6:18pm
|
I know of zero Antique clubs that allow radials. Go ahead and put some on and if you start winning, at the next Rules meeting they will be banned.
|
Posted By: cwhit
Date Posted: 20 Jan 2014 at 6:55pm
|
You need to get a set of Firestone 15.5-38s. Better yet, find 2 sets, call me and I'll take the second set off your hands.....
|
Posted By: allispuller
Date Posted: 20 Jan 2014 at 7:06pm
|
The only thing i see is if i get 15.5-38 the ground speed chart i have found shows 1st gear around 4 mph and i need to stay at 3.5
|
Posted By: cwhit
Date Posted: 20 Jan 2014 at 7:14pm
|
You won't be able to open it up until you get a load on the engine (about 1/2 - 2/3 down the track ) by then you'll be glad you have 38s.
|
Posted By: 2wise4agm
Date Posted: 20 Jan 2014 at 7:32pm
|
Dr is right. Most clubs don't allow radials. But if by some chance you can run them, they'll make a big difference. The firestone 23* is the tire of choice around here. Firestone f151 is pretty popular in a bias ply.
|
Posted By: Gar
Date Posted: 21 Jan 2014 at 6:49pm
|
I'm pretty sure the largest antique tractor pull in the world allows radials. Tunica
|
Posted By: 2wise4agm
Date Posted: 21 Jan 2014 at 6:51pm
|
Rules are pretty loose at tunica compared to most clubs.
|
|