Print Page | Close Window

Hydraulic Pressure

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8305
Printed Date: 19 Jul 2025 at 9:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Hydraulic Pressure
Posted By: Scott(SC)
Subject: Hydraulic Pressure
Date Posted: 18 Feb 2010 at 8:32pm

Is there a standard pressure for hydraulics on tractors?



Replies:
Posted By: Rick of HopeIN
Date Posted: 18 Feb 2010 at 8:39pm
never really was a standard for ag tractors but 2000psi to 2500psi was typical from 60s into the 80s, lots of components were available in that range.  They have been creeping up on many machines over the years.  
AC was the exception with hydraulics setup for over 3000 psi even in early units.  They used small cylinders and low volume pumps compared to others.


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net