Onan pistons?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=81364
Printed Date: 22 Nov 2024 at 10:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Onan pistons?
Posted By: Tracy Martin TN
Subject: Onan pistons?
Date Posted: 05 Dec 2013 at 9:06pm
| Where is the best place to buy Onan pistons, and bearings? I need some for a 616-620 rebuild. Thanks Tracy |
Replies:
Posted By: Larry Miller
Date Posted: 05 Dec 2013 at 9:15pm
|
I think Cummins bought out Onan. Check one of their shops. I got some parts couple years ago. ------------- I used to be young and stupid, now I am not young anymore. |
Posted By: ctbowles58
Date Posted: 05 Dec 2013 at 9:19pm
|
Cummins owns Onan now, so get ready to dig deep in your pockets, i was going to "overall one in a 620 that i had about 7 or 8 yrs ago and the parts alone was something over $1600.00 back then ------------- 190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more |
Posted By: Tracy Martin TN
Date Posted: 05 Dec 2013 at 9:22pm
Tom, thanks for the upbeat news,LOL.I figured it wasn't going to be pretty.Tracy ------------- No greater gift than healthy grandkids! |
ctbowles58 wrote:Posted By: NDBirdman
Date Posted: 05 Dec 2013 at 11:42pm
|
I see them on fleabay every once in a while.
------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Posted By: ACook
Date Posted: 06 Dec 2013 at 12:35am
| I go to onan parts.com and price what I can before I go to my local Cummins dealer. They are usually very close. Then I'm not shocked at the price when the salesman doesn't bat an eye and says that'll be $$$$ for a few parts I can put in my pants pocket and walk out the door with. |
Posted By: wjohn
Date Posted: 06 Dec 2013 at 7:22am
|
I have a CCKA I need to rebuild in a Gravely 816 garden tractor. $90 for a gasket kit, $240 for two pistons, plus another $60 for rings and however much for the machine work... and who knows what valve parts and bearings I'll need. I guess I'm used to Kohler and Honda parts prices. ------------- 1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45 |
Posted By: Steve in NJ
Date Posted: 06 Dec 2013 at 11:23am
|
That's good to know, cause' I gotta' tear into the engine in the 620 I just bought. I understand those engine parts aren't cheap! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Alberta Phil
Date Posted: 06 Dec 2013 at 8:53pm
| I have an Onan engine on my welder and was shocked at prices!! Thought the guy was quoting prices for Duesenberg parts!!LOL |
Posted By: Steve in NJ
Date Posted: 08 Dec 2013 at 7:54pm
|
Oh boy! That's scary Philly!!
------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: HudCo
Date Posted: 09 Dec 2013 at 11:36am
| hello onan parts are not going to be available except for generators very soon so any other parts will be hard to get we own tractorandequipmentservice.com and our machine shop just done a p218 and had to buy parts from seven differant places we are doing a 720 with a new briggs 23 hp for a customer i would recomend doing that |
Posted By: Brian Jasper co. Ia
Date Posted: 12 Dec 2013 at 7:08am
|
There's a web site www.onanparts.com that has a lot of what you need. At one time they had complete kits in the $1200 range. I've also seen a seller on evilbay that offers reman short blocks for them in the $1200-$1400 range. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |