AC 616-620 mower deck shells
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=81328
Printed Date: 22 Nov 2024 at 11:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 616-620 mower deck shells
Posted By: Tracy Martin TN
Subject: AC 616-620 mower deck shells
Date Posted: 05 Dec 2013 at 10:42am
| I am fixing to make a few mower decks for the 616-620 mowers. They may fit the 720 also, not sure about that. These would be like originals. You would need your mounting brackets and spindles and gage wheel assemblies. This is just basically the deck shell. It will be as close to the original as possible. Material will be as thick or thicker. If you are interested in one let me know. The larger number I make will lower the cost on them.I won't make another run of these. I need three myself, any more will just lessen the cost on everyone that needs one.As always they will have the quality of my other reproduction parts. Thanks Tracy |
Replies:
Posted By: den/southern illinoi
Date Posted: 05 Dec 2013 at 2:22pm
|
Tracy, I don't need one but will note that if it fits the 616 and 620, it will fit the 720s. Same frame, same hook up for power and same lift set up. Den ------------- Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: Tracy Martin TN
Date Posted: 05 Dec 2013 at 3:28pm
| Den, thanks for the help. We will see if anyone is interested in them. Tracy |
Posted By: 190xt
Date Posted: 05 Dec 2013 at 5:57pm
| I WOULD BE INTERESTED IN ONE DO HAVE ANY IDEA HOW ON PRICE . THANKS 190 XT. |
Posted By: Tracy Martin TN
Date Posted: 05 Dec 2013 at 8:01pm
After I see the interest in units I will break it down.Thanks Tracy Martin |
190xt wrote:Posted By: 190xt
Date Posted: 05 Dec 2013 at 8:15pm
| OK TRACY THANKS. |
Posted By: gitrdun
Date Posted: 06 Dec 2013 at 9:42pm
|
what other repo parts do you produce?
keith
|
Posted By: Tracy Martin TN
Date Posted: 07 Dec 2013 at 4:20pm
Snap coupler parts,aluminum master lift handle for the G, brake - clutch pivot rod for G,seat pin repair kit for the D series,grill guards for the D10-12, D15-17, and a few other small parts. Tracy Martin ------------- No greater gift than healthy grandkids! |
Posted By: accoll
Date Posted: 12 Dec 2013 at 3:42pm
| I have parts needed to complete. Cheap. 813-454-9046. Florida |
Posted By: Tracy Martin TN
Date Posted: 12 Dec 2013 at 4:17pm
|
accoll, sent you a pm. Tracy ------------- No greater gift than healthy grandkids! |
Posted By: ACmowerguy
Date Posted: 12 Dec 2013 at 6:55pm
|
You might put this over on the Simpletractors Forum too. I believe the power max decks are all interchangeable so this would also include Simplicity models such as the 4040, 4041, 9020, etc. ------------- 10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments |
Posted By: coggonobrien
Date Posted: 02 Jan 2014 at 10:08am
|
depending on price I might be interested, do you go to the allis show in Hutchinson,mn? would cut down on shipping. David |
Posted By: accoll
Date Posted: 02 Jan 2014 at 11:32am
| Price is $100.00. Planning on foing to Hutch, Laport, Lathrop , MO.. shows. |
Posted By: Dusty MI
Date Posted: 07 Jan 2014 at 6:47pm
|
I bought a new one for my 917 from AGCO, maybe 3 or 4 years ago. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: coggonobrien
Date Posted: 08 Jan 2014 at 9:05am
| Just wanted to verify that it is $100 for the shell Tracy is building, or were you talking the parts you had to complete one |
Posted By: accoll
Date Posted: 09 Jan 2014 at 8:32am
| Price is for complete 60 inch deck for 616 tractor, (used) |
Posted By: Harry up of Mi.
Date Posted: 21 Jan 2014 at 9:26pm
| Tracy I am interested in one of the 620 mower decks if they are going to be around 100 dollar range. I will be at the Lathrop show. |
Posted By: Tracy Martin TN
Date Posted: 21 Jan 2014 at 10:45pm
| Harry, I am interested in them too for that price.The material would be more than that. I will put a pencil to them and see the cost.Shipping will be expensive because of weight and size. Thanks Tracy Martin |
Posted By: Tracy Martin TN
Date Posted: 21 Jan 2014 at 10:47pm
That is for his deck I think! Tracy Martin ------------- No greater gift than healthy grandkids! |
Posted By: coggonobrien
Date Posted: 22 Jan 2014 at 8:21am
| Tracy do you have a guesstimate on yours |
Posted By: LNG Luke
Date Posted: 09 Apr 2014 at 11:50am
| I'd be interested in one of the decks if it's not too late? Let me know 815 693 8475 thanks Luke |
Posted By: Pat SW Ohio
Date Posted: 09 Apr 2014 at 8:28pm
| Tracy, put me down for one. Thanks |
Posted By: Tracy Martin TN
Date Posted: 09 Apr 2014 at 8:56pm
|
I will have them complete in a couple of weeks hopefully. Got my parts all lasered out and ready to form. I will post pics as soon as I finish one. Thanks Tracy ------------- No greater gift than healthy grandkids! |