Pulling Forum - need sleeves for wd

Print Page | Close Window

need sleeves for wd

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=81082
Printed Date: 24 Nov 2024 at 5:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need sleeves for wd

Posted By: kniesshy
Subject: need sleeves for wd
Date Posted: 30 Nov 2013 at 9:51pm

in a pinch with sleeves...gave the motor to a guy tk bore n press sleeves in and he ordered sleeves that were wrong due to a pn change. it is a 4 1/2 bore by a 5 1/2 stroke engine...any help ?

Replies:

Posted By: firephight
Date Posted: 30 Nov 2013 at 10:50pm

What size do you have? If there 4in might be interested

Posted By: kniesshy
Date Posted: 01 Dec 2013 at 8:00am

they were 4 1/2 but were not long enough...sennt em back sorry

Posted By: wi50
Date Posted: 01 Dec 2013 at 11:02am

I got your pm but i've been so busy I just haven't had 5 minutes of spare time to get back. You custom order sleeves from a sleeve manufacturer such as LA Sleeve, Darton, or Power Bore. I'd order ductile iron sleeves from Power Bore in Ohio, I can get you a blueprint of the dimensions I use as I need to send it to another fella. What I should do is get 12 or 20 of them made as there's a quantity break, I need some sets for this winters builds anyway. At times I make sleeves from take out sleeves from other engines, but I just don't have time and a ductile iron sleeve is much easier to work with.

-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"

Posted By: kniesshy
Date Posted: 02 Dec 2013 at 7:32am

yes send the blue print if you can!if u need my email its dirt_bike77@yahoo.com