Construction and other equipment

Print Page | Close Window

H-3 track parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=80592
Printed Date: 28 Jun 2025 at 8:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H-3 track parts

Posted By: TREVMAN
Subject: H-3 track parts
Date Posted: 20 Nov 2013 at 9:13pm

Wondering if there is any chance on finding drive sprockets? What about rollers? Could a guy build up and grind the old sprockets to suitable use? Thanks in advance, Trev.

Replies:

Posted By: Eric B
Date Posted: 23 Nov 2013 at 1:37am

Are you wondering about brand new sprockets or OK used ones? With lots of time, patience, welding rods and a grinder you can certainly improve old ones. I can sell you a whole parts machine if you come out to B.C.

-------------
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!

Posted By: Coke-in-MN
Date Posted: 23 Nov 2013 at 9:32am

Rollers and idler can be welded up . Many track shops have submerged arc welders (wire feed with powdered flux) setups just for buildup work.

Getting sprocket tooth profile right to align with bushing might be more work . Some outfits sell weld in cup that you position on sprocket then weld in place.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: TREVMAN
Date Posted: 24 Nov 2013 at 2:50pm

Thanks for the info, Trev.