Pulling Forum - 301 AC engine plate and adaptor to mount P-pump

Print Page | Close Window

301 AC engine plate and adaptor to mount P-pump

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78378
Printed Date: 22 Nov 2024 at 11:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 301 AC engine plate and adaptor to mount P-pump

Posted By: Slade (TN)
Subject: 301 AC engine plate and adaptor to mount P-pump
Date Posted: 09 Oct 2013 at 3:55pm

I have a 301 engine plate and adaptor plate to mount a p-pump on these engines and use all four of the pump mounting bolts (instead of cutting an ear off the pump).....the hyd pump drive hole has been opened up to use vickers vane pumps for fuel supply on pulling engines.....this was on a twin spin 301.....not likely going to be using this for anything in the near future....or far future either!

615-542-6999

Slade