Pulling Forum - Clocking axle housing on WD

Print Page | Close Window

Clocking axle housing on WD

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78290
Printed Date: 24 Nov 2024 at 2:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Clocking axle housing on WD

Posted By: s!dexs!de
Subject: Clocking axle housing on WD
Date Posted: 08 Oct 2013 at 5:10am

Anyone have information on clocking axle housing on a WD ? Suppose to lengthen wheel base about 7".

Replies:

Posted By: CAL(KS)
Date Posted: 08 Oct 2013 at 5:57am

if you mean rotating the final drive rearward, then yes it can be done. just pull the bolts and turn, but alot of pulls wont allow altered wheel bases

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: bmartin55
Date Posted: 08 Oct 2013 at 8:29pm

what bolts u have too pull..at the deferinchals or at rear houeing next too punkon..lol gears& brakes do they have to come out..

Posted By: DrAllis
Date Posted: 09 Oct 2013 at 4:51pm

This has been discussed before. I highly doubt any Antique Club/Organization would ever allow this to compete in any regular class. It has been done for nearly 40 years in the NTPA with 180 Allis's in the 5000-5200 and later on 5500 lb diesel super-stock class. You go ahead and change a "WD or WD45 or D-17 and see how many places won't let you compete. Be sure to save your old drawbar and wheelie bars, because you'll soon be bolting them back on.