need pistons&sleves
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78111
Printed Date: 24 Nov 2024 at 2:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: need pistons&sleves
Posted By: bmartin55
Subject: need pistons&sleves
Date Posted: 04 Oct 2013 at 10:01pm
| looking for pistons sleves & rings for gleaner 17 in a wd for pulling...4.250 or something t hat i dont have too do machine work..going to put a 175 cam in ..thanks bob.. PS met BARNEY TAYLER at morgan county pulls had a good talk... |
Replies:
Posted By: firephight
Date Posted: 25 Oct 2013 at 7:59pm
| What kind of recipe did he advise you of? I was looking to build one with wc over sized pistions and sleeves and a 175 cam with a d17 series4 head |
Posted By: bmartin55
Date Posted: 25 Oct 2013 at 8:17pm
he said use 175 cam 4 1/8 pistons ..do the head 3 angel grind litte heaver springs..use gleaner carb change ventura just a little biger if.. neaded. just talked with BARNE yesterday for a while..good GUY to talk to.. ...
|
Posted By: firephight
Date Posted: 25 Oct 2013 at 9:34pm
| Is that the guy that custom grinds cams? |
Posted By: jpankey
Date Posted: 26 Oct 2013 at 10:54am
| Got a block that could be available with sleeves for.big block mopar pistons four flat top forged pistons 1500 |