Pulling Forum - governor question

Print Page | Close Window

governor question

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=77527
Printed Date: 24 Nov 2024 at 3:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: governor question

Posted By: cotncrzy
Subject: governor question
Date Posted: 24 Sep 2013 at 9:09pm

Will the governor assembly off of a wd 45 engine work on a E gleaner combine engine? I bought one today without the gov. box.

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!

Replies:

Posted By: Kip-Utah
Date Posted: 24 Sep 2013 at 9:15pm

Yes

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!

Posted By: DrAllis
Date Posted: 25 Sep 2013 at 6:12am

You will probably have to adjust the backlash on the governor gear to the camshaft gear and drill or redrill a line-up dowel hole to keep the lash setting correct.

Posted By: firephight
Date Posted: 26 Oct 2013 at 11:03am

Dr Allis any pics of this mod and how do you know when the lash is correct?