Pulling Forum - WD 45 vs D17

Print Page | Close Window

WD 45 vs D17

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=75917
Printed Date: 23 Nov 2024 at 11:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD 45 vs D17

Posted By: WCinVA
Subject: WD 45 vs D17
Date Posted: 27 Aug 2013 at 8:21pm

What is the difference in a WD 45 engine compared to a D17? And which block would be better to start with in a WC project?

Replies:

Posted By: CTuckerNWIL
Date Posted: 27 Aug 2013 at 8:31pm

Main bearings are heavier and I believe there is some reinforcement in the block webbing. If your club will allow, go with the 17 block.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: patrickmull
Date Posted: 27 Aug 2013 at 8:32pm

the later 17 or e gleaner has a better oiling system that's why i used the e engine

Posted By: Gary in da UP
Date Posted: 27 Aug 2013 at 8:36pm

D17 head breathes better, better oiling, Beefier crank with center thrust bearing.

Posted By: WCinVA
Date Posted: 27 Aug 2013 at 8:42pm

Thanks for the info guys. Sounds like I will go with the 17.