Construction and other equipment - H-3 Bottom Roller Frame Removal

Print Page | Close Window

H-3 Bottom Roller Frame Removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=75102
Printed Date: 29 Jun 2025 at 10:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H-3 Bottom Roller Frame Removal

Posted By: orangeman
Subject: H-3 Bottom Roller Frame Removal
Date Posted: 13 Aug 2013 at 5:34pm

Guys: I am wanting to replace my truck rolls on a 1961 H-3. The machine is equipped with and inside push beam set up.

For the purposes of working on it, I want to remove the whole assembly from the rear round shaft that it slides over. What method have you guys used to pull the whole assembly? I know I could replace the rollers by jacking it up, but I do need to get inside the rail assembly to tidy up the front portion of the rail as it is bent allowing some displacement at the idler.

I was thinking a porta power would come in handy with some heat to coax the rail off the round stock.

Any insights would be greatly appreciated.

Thank-you....Orangeman