Pulling Forum - Rear weight bar?!

Print Page | Close Window

Rear weight bar?!

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=74672
Printed Date: 23 Nov 2024 at 3:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Rear weight bar?!

Posted By: mufflerboltz
Subject: Rear weight bar?!
Date Posted: 05 Aug 2013 at 8:18pm

Hey guys, I've been busy as heck this summer and have not made it to one single pull with the wd45 this year. Well it turns out I have some free time this Saturday finally and decided to go pulling with my brother, just to beat his JD A with the ole' 45, the deal is I normally just through my weights on the snap coupler arms and go with it but last time i did that i was warned to change it the next time i pull with that club. So i was wondering any of you would show some pics of weight bars made to attach to the arms that would give some ideas on what i could build quick before saturday! Thanks again!

Replies:

Posted By: wi50
Date Posted: 05 Aug 2013 at 8:44pm

Well I don't have a pic, but I took 2 pieces of 3" channel iron about a foot long and slid them on the snap coupler arms. those arms are tapered, so I slid them far enough on to get tight, drilled a hole where it lined up with the hole in the end of the arm and bolted. Cut a piece of angle iron to weld between the channels.

pretty self explanitory, quick and cheap.

-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"