Pulling Forum - 226 engine build

Print Page | Close Window

226 engine build

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=73567
Printed Date: 24 Nov 2024 at 12:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 226 engine build

Posted By: firephight
Subject: 226 engine build
Date Posted: 16 Jul 2013 at 9:05am

I am wanting to build a engine to swap in my stock 45.I am going to use a gleaner block and found a 175 cam with 45 crank.just looking for some setups that others are using. Drop me a p.m

Replies:

Posted By: WCCLASON
Date Posted: 16 Jul 2013 at 9:17am

to keep it simple....Use WC flat top with the 45 crank. gives you more compression....and port the head....that's what I have and it runs really well. I have new stock size valves with a three angle valve job with back cut valves as well. I also have one with a actual 175 cam and it is a tough tractor. I on that tractor I am also just running a Gleaner E carb as well....Nothing to special but when done right makes good power. Just my 2 cents...

Posted By: cotncrzy
Date Posted: 17 Jul 2013 at 7:32am

Yep, WC is right simple build for lots of power increase. Find a little different piston, or modify yours to increase compression and it make alot of difference.

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!

Posted By: mlpankey
Date Posted: 17 Jul 2013 at 10:35am

i wonder why when the hp went up allis engineers increased Main bearing size and used a stiffer block with better oiling system. lol

-------------
people if they don't already know it you can't tell them. quote yogi berra

Posted By: Glockhead SWMI
Date Posted: 17 Jul 2013 at 11:30am

Not sure you can use a gleaner block and a 45 crank...