This Forum
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=71328
Printed Date: 23 Nov 2024 at 6:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: This Forum
Posted By: SF Fan
Subject: This Forum
Date Posted: 04 Jun 2013 at 8:30am
|
I just read some posts and I must say this section sure does live up to it's name.
I think there should be another Pulling Forum for the serious tractor pullers.
It should be the No Pulling{LOL} Pulling Forum.
XXXOOO's  ------------- I Just Love Rice-A-Roni |
Replies:
Posted By: Charlie175
Date Posted: 04 Jun 2013 at 9:06am
|
I participate as much as I can, I'm just a basic stock puller, I guess you are looking for ahkie burners? ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: SF Fan
Date Posted: 04 Jun 2013 at 12:40pm
|
No you missed my point.
They are some the pull and then there are a few that are pulling it.
XXXOOO's ------------- I Just Love Rice-A-Roni |
Posted By: Charlie175
Date Posted: 04 Jun 2013 at 1:10pm
|
What? Speaketh English please ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Ihateillinoisnazis
Date Posted: 04 Jun 2013 at 1:46pm
|
He's talking about the conversations that go on around here. Most of those conversations are sparked up when the resident r-tard rears his ugly keyboard skills spewing complete bull roar about whatever the topic might be. Cam timing, flywheel weights, Chevy valve lengths, and currently how to file a chain saw chain... Most should have noticed that in the last two months the bickering has stopped when the dinkus was spewing his jibberish over at YT. They didn't like him there either. |
Posted By: Charlie175
Date Posted: 04 Jun 2013 at 2:14pm
|
OK, totally went over my head :) ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: SF Fan
Date Posted: 04 Jun 2013 at 5:18pm
 .
XXXOOO's ------------- I Just Love Rice-A-Roni |
Charlie175 wrote:Posted By: cornbinder
Date Posted: 04 Jun 2013 at 6:15pm
|
I like the power block A winning the 10,000 lb class. Maybe I'll pull my 185 in the 15,000 lb class in 3rd gear ------------- D-19 gas w/f-sold 185-d yr round cab 95 mustang gt 5.0 86 mustang 5.0 coupe 3 99 f-250 7.3 4x4's 96 f-250 7.3 4x4 |
Posted By: Rod B
Date Posted: 04 Jun 2013 at 6:18pm
|
When there's no witness even a powerblock A can win. I bet there was 42 tractors in the class. ------------- for the money there is nothing better than provoking idiots and posers |
Posted By: mlpankey
Date Posted: 04 Jun 2013 at 8:53pm
------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: SF Fan
Date Posted: 04 Jun 2013 at 9:06pm
|
Good God Almighty, it never ends.
No, Please tell us so I can get some freakin' sleep tonight.
I have been wondering about that all day.
XXXOOO's
http://s1357.photobucket.com/user/SF_Fan1/media/ts_zps343b3346.png.html" rel="nofollow">  ------------- I Just Love Rice-A-Roni |
Posted By: WCCLASON
Date Posted: 04 Jun 2013 at 11:18pm
Posted By: WCCLASON
Date Posted: 04 Jun 2013 at 11:21pm
| Im just wondering whats with the no cheese head profile pic?.....Lol i havent said any BS just what i know and what i have been doing. And idont know anyone from Wi. that is on here that doesnt know what they are talking about. But yes....I have been flooded with questions lately by people who have seen what i have done and want STRAIT forward answers to their questions. So i know what you mean. |
Posted By: SF Fan
Date Posted: 05 Jun 2013 at 4:12am
|
I'm a 49ers fan {SF Fan} and that avatar came about because of an angry Packers fan
Never heard from him again after that.
XXXOOO's ------------- I Just Love Rice-A-Roni |
Posted By: SF Fan
Date Posted: 05 Jun 2013 at 5:05am
Your reply should start off She's talking about.
Yes there are woman on here.
XXXOOO's
------------- I Just Love Rice-A-Roni |
Posted By: Ihateillinoisnazis
Date Posted: 05 Jun 2013 at 5:44am
Or are you the "she" around here, constantly complaining and posting X's and O's in your sig line? Food for thought... |
Posted By: Rod B
Date Posted: 05 Jun 2013 at 7:09am
"We" don't cobble things badly like you do spankey. We use parts for correct valve train geometry and use new springs in our pulling and race engine building programs. Just like your shop though we are fictional and only pulling legs and jerking chains here on the pulling forum amungst the real tractor pullers. You do have quite a reputation to uphold on doing things wrong and not being able to figure things out for yourself or should I say "yourshelf". Regular engine failures. Buying winning engines and tuneing them into less than stock power. Bent rods, broken cranks, wrong cam choices and haveing to get your valvetrain and cams from someone else. ------------- for the money there is nothing better than provoking idiots and posers |
Posted By: WCCLASON
Date Posted: 05 Jun 2013 at 8:13am
| Well there is a few people on here that think that the few of us from WI cant build a pulling tractor. That all...thought that was towards that.....lol Anyway ...Glad to see there is some girls on the form. Guess I didn't look at the profile or post's very close. Sorry. |
Posted By: CTuckerNWIL
Date Posted: 05 Jun 2013 at 8:46am
Just another way the Pankster can use his vast mindful of mathematics  When I find a valve that I want to use that is too long for the application, I have put them in a lathe, cut to length and re-cut the retainer groove. Seemed to work fine and I didn't have to use the calculator or a bunch of paper to figure out different geometry.  ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: SF Fan
Date Posted: 05 Jun 2013 at 2:12pm
Well someday you'll just have to hop on your tractor and take a ride a find out for yourself.
XXXOOO's
------------- I Just Love Rice-A-Roni |
Posted By: SF Fan
Date Posted: 05 Jun 2013 at 6:04pm
|
From Above,
Or are you the "she" around here, constantly complaining and posting X's and O's in your sig line? Food for thought...
Never complain, I just point out facts.
Fact: There are babies on here.
XXXOOO's ------------- I Just Love Rice-A-Roni |
Posted By: mlpankey
Date Posted: 05 Jun 2013 at 6:48pm
|
i haven't seen a tractor from wisconsin yet. rod has a tricycle with a bell and tassles ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: WCCLASON
Date Posted: 05 Jun 2013 at 10:27pm
Posted By: WCCLASON
Date Posted: 05 Jun 2013 at 10:29pm
|
Posted By: WCCLASON
Date Posted: 05 Jun 2013 at 10:33pm
| Here are the two of mine!.....The right one i just finished.....240CI and 65 proven HP. Not bad. I do very well in my area. they dont allow big cubes in are club so i am forced to make as much HP as i can but still follow are rules....And they do tech are tractor for cubes. I also have videos.... Both tractors got first place last last sunday 3500lbs and 4000lbs classes |
Posted By: Ihateillinoisnazis
Date Posted: 05 Jun 2013 at 11:24pm
You haven't seen a tractor from Wi yet eh? I'm pretty sure there has been a few that were posted in the vid section that are from Wi. Also that crank Wi posted pics of and you said wouldn't work... I believe the video of the first pull out looked pretty darn strong for a LSS on alky in test mode. His record is posted on the website for all to see unlike your's. How's your junk pouland chainsaw with no rakers running? Go home troll. What about Wi's balistic tractor that you get wet dreams over? That's fromWi... How about the 4 cyl moline running limited light super. That's from wi. I think Carl on here is from Wi. What about the head on Andy's tractor?? Also. SF fan. You edit your posts almost as efficiently as the spunkster, friends, same person? |
Posted By: SF Fan
Date Posted: 06 Jun 2013 at 4:24am
|
I'm really bad on the keyboard.
After I post it I usuaslly find more than one mistake and also add something I forgot.
XXXOOO's
------------- I Just Love Rice-A-Roni |
Posted By: SF Fan
Date Posted: 06 Jun 2013 at 4:26am
|
I didn't edit the last one but after I posted it I do see a mistake.
Happens every time.
XXXOOO's ------------- I Just Love Rice-A-Roni |
Posted By: mlpankey
Date Posted: 06 Jun 2013 at 5:46pm
------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: polo1sam
Date Posted: 06 Jun 2013 at 8:13pm
| I am new here but can clearly see you sir are a legend in your own mind. |
Posted By: WCCLASON
Date Posted: 06 Jun 2013 at 9:44pm
| And this is why i am done with this guy....Im telling you what i can do becuase of are rule....I know i havent built a big cubes or stroke motor but who says i cant. Just tired of this guys negative feed back, I was just showing you what i can do, and within my rules i do very well. So like i said. Good luck in tenn. or were ever. It would be nice to build a big motor and play though. What are you pulling for a tracotor right now? Im just wondering.... |
Posted By: CTuckerNWIL
Date Posted: 06 Jun 2013 at 9:47pm
|
Spanky use a tow rope to Pull his tractors ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: THE-MAN
Date Posted: 06 Jun 2013 at 9:49pm
| That was my old cylinder head. It really wasnt that bad. My new one is alot better tho. |
Posted By: THE-MAN
Date Posted: 06 Jun 2013 at 10:21pm
|
At least I have put forth bonafide info between my old head and my new one. Thats more than the beat-around-the-bush, say-but-you-really-dont-say-anything BS that spews from you. Like all those motors you were building, your big stroke crank that you "were sooo busy working on" . Nope. Jealous Mitch and No Pic Mitch so on and so on. You're a One Pump Chump, buddy. Its too bad, all this. I mean, you had 6 or 7 people fooled. The rest tolerated you because you were talkative. Now, EVERYONE KNOWS you are a putz. You proved that beyond debate. Its not even arguable anymore. If I can attribute anything to you tho, you're persistent. You may act the fool, again, and again, and again, and again, but you keep after it. You hustle. Almost like you are just too ignorant to know when to quit. But Im not actually SAYING that you ARE too stupid to realize you are in the bottom of a pit, which you dug yourself, however, I could see where one, anyone, everyone, might draw that conclusion. I guess you DO hold some value tho, too. I mean, look at most YT and UNOFFICIAL Topics. Lately, you single handedly hold the power to ruin alot of good conversations by breaking in and spewing unrelated garbage on everyone. Pretty strong stuff. You hold the posting participation down JUST by showing up. No one wants to DEAL with you. Therefore not many people post after you do. Thats PRETTY HANDY so everyone can catch up on their reading. You kill it DEAD. Thats alot of power. Maybe more power than any motor you ever blew up. And to think, I was about to refer to you as useless... Just like Round-up, De-Con and Abortion, you kill something off. "A good topic? 14 posts with some info exchange? I better post some garbage "...and...BAM!! DEAD POST!! Now obviously, some of this is tongue and cheek, and I know your ego wont let you take it harmfully. So, when you go stand in front of your imaginary Gleason crank welder, and make imaginary ZZZZZZZZZZZZZZZZZZZZZZZZZ welding noises, think of this; You can fool some of the people some of the time, but you cant fool all of the people all of the time. Good night, buddybear. Sleep tight in fantasyla....oops capitol F Fantasyland, cause you really live in it. |
Posted By: Ihateillinoisnazis
Date Posted: 07 Jun 2013 at 12:21am
|
Spunky... I'm going with the KISS method and well.. You should just go away. Also, supersonic air speed has nothing to do with the stress and stain on a rod. Look at the equation for torque once. Before you jump to physics II you should try physics I. Physics is why rods bend at severe angles.. Statics is a fun class... Try it sometime.. |
Posted By: mlpankey
Date Posted: 07 Jun 2013 at 9:00am
|
A engine is measured in cubic inches of air it displaces. More air it displaces the more fuel it needs for the proper stoich . More air and fuel the more btus is created , btus is easily converted into horsepower ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: Ihateillinoisnazis
Date Posted: 07 Jun 2013 at 9:35am
Way to go caption obvious, thanks for enlightening us all once again. |
Posted By: mlpankey
Date Posted: 07 Jun 2013 at 1:18pm
|
its obvious and needs pointed out to some that increase horsepower increase component stresses. i would also like to point out that a connecting rods highest angular speed is at 90 and 270 degrees. ------------- people if they don't already know it you can't tell them. quote yogi berra |