ENGINE YEAR??
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=67658
Printed Date: 23 Nov 2024 at 2:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ENGINE YEAR??
Posted By: 51WILLYS
Subject: ENGINE YEAR??
Date Posted: 26 Mar 2013 at 11:54pm
|
I just picked up a WD45 block today because my WC block has a small crack in it from previous owner who did not have antifreeze in it. Anyways the serial # on the block is 45-24827-G. I was just wondering if anyone could tell me the year of this engine just because im curious thanks. It came complete minus a head but needs rebuilt its been open for years.
|
Replies:
Posted By: wi50
Date Posted: 27 Mar 2013 at 6:26am
Look on the main cap, there's a 2 didget number stamped in the caps with the year. Should be anyways, though I thought I rembered seing it stamped in the machined surface on the bottom of the block...... though I just looked at a couple blocks and it's in the main cap on both.
-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
Posted By: 51WILLYS
Date Posted: 27 Mar 2013 at 12:37pm
|
Main cap has a 34 on it as well as the machined surface of the block. One rod bearing cap has a 58 one of the other ones has a 67.
|
Posted By: THE-MAN
Date Posted: 27 Mar 2013 at 12:47pm
I think the Main cap stamping is to match the set of caps to the block. Like block stamped 13, and three 13 caps, well, there ya go. Maybe they had the year stamped in there too, I dunno. I dont think allis did much to keep chassis and engine sn's correlated so it would be a guess at best. As far as the rods go, as long as the cap and the rod numbers match, you are ok...either the same process as the mains, or they have been re conned at one point.
|
Posted By: CTuckerNWIL
Date Posted: 27 Mar 2013 at 2:43pm
Looks like a 1954 engine number. Take a look at this website for all sorts of Allis info.
http://people.clemson.edu/~wsmth/" rel="nofollow - http://people.clemson.edu/~wsmth/
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: 51WILLYS
Date Posted: 27 Mar 2013 at 7:13pm
|
Thanks for the help and the link that's a useful site. I was just curious of the year that's all.
|
|