Pulling Forum - Diesel Rocker arm Stands

Print Page | Close Window

Diesel Rocker arm Stands

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=67234
Printed Date: 23 Nov 2024 at 12:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Diesel Rocker arm Stands

Posted By: O.P.S. Heads
Subject: Diesel Rocker arm Stands
Date Posted: 20 Mar 2013 at 9:18am

Replies:

Posted By: injpumpEd
Date Posted: 20 Mar 2013 at 7:43pm

O.P.S. Heads wrote:

If anyone has a set of the "older" 301 or 426 diesel rocker arm stands that use the longer 3/8 bolt I would be interested in at least one complete set if not two. The newer ones use a short (like 1 1/2 long) 3/8 bolt and the older ones are much longer with the bolt boss being the same height as the other 9/16 retaining bolt / head bolt.

If anyone has some of these PM me or send an email to mailto:opsheads@hotmail.com" rel="nofollow - opsheads@hotmail.com .

Thanks

Steve, I'm pretty sure I have a couple rocker shaft assemblies with the taller stand. I don't think I've ever seen one with a step for the shorter 3/8" bolt. Ed.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: O.P.S. Heads
Date Posted: 20 Mar 2013 at 8:30pm

Posted By: MACK
Date Posted: 21 Mar 2013 at 7:17am

All 426 were the same height for both bolts all 301 had the long and short bolt. I should have some if you still need some. MACK