Construction and other equipment

Print Page | Close Window

snow thrower on G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=66662
Printed Date: 26 Jun 2025 at 12:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: snow thrower on G

Posted By: Mike(NEOhio)
Subject: snow thrower on G
Date Posted: 10 Mar 2013 at 5:21pm

Can anyone identify the snow thrower that came on my G? The rear end mounts to the same place as the Mott mower and runs off the same idler and tensioner pulleys to a midshaft, then another belt to the front and a chain drive to the auger. The frame is channel iron with a clevis welded between them at the rear. Turnbuckles attach the frame to the tool lift bar. Looks like it had a crank and cable to turn the chute. I can't figure out how to post picture here. You can see it on the YT "Help Identify" page. Scroll back a ways and you'll see them.

Replies:

Posted By: Dusty MI
Date Posted: 13 Mar 2013 at 9:56am

I have a manual by Jensales that shows all the attachments made by Allis Chalmers for the G and there is no snow blower in it.

The loader made by Midwest is not in it.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Posted By: Mike(NEOhio)
Date Posted: 14 Mar 2013 at 5:30pm

Thanks, Dusty

I never really thought it was from AC. I was thinking maybe Mott because it mounts to the same drawbar bracket and the pulley castings are the same as the flail mower. It doesn't look home build either. Also uses the same idler and tensioner pulleys.