426 stock rods
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=66340
Printed Date: 23 Nov 2024 at 12:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 426 stock rods
Posted By: Coke-in-MN
Subject: 426 stock rods
Date Posted: 04 Mar 2013 at 6:54pm
|
https://www.facebook.com/matthew.bauer.12" rel="nofollow - Matthew Bauer 
------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Replies:
Posted By: DougG
Date Posted: 04 Mar 2013 at 7:11pm
| Yup they are bent ! Isnt that something that they just couldnt do that right in West Allis or Harvey ; parts came from Japan , France , West Germany and im sure other countries, but everyone done it |
Posted By: injpumpEd
Date Posted: 05 Mar 2013 at 1:54pm
------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Coke-in-MN wrote:Posted By: mlpankey
Date Posted: 06 Mar 2013 at 10:57am
|
Unfortunately none of allis rods do well without being flame hardened to a harder rockwell and then when they fail they break and that usually gets the block. These after market slimline rods mass produced out of someones cnc machine if there not about 450 a piece. BE learey of them. If the material is hard enough then the machine time is great and everyone charges for machine time.some rockwell testing has been done on a prominant aftermarket rod and rocker manufacturer and his 4340 hardness was averaging 20. As one poster on the rod debate said 4340 comes in billet stock in about 15 different hardness. Do you know the hardness the rod manufacturer is purchasing and are you willng to just take his word for it. ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: wi50
Date Posted: 06 Mar 2013 at 11:06am
|
Who's the prominant rod and rocker manufacturer you are refering to and where's your proof? ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mlpankey
Date Posted: 06 Mar 2013 at 11:10am
|
As you said once my information. I have learned is mine comes at my expense and its mine at my discretion to share with whom i like and whom not to because i do not like. You wi are not on the like list.coke however is. If i posted video you would stil try to diacredit. Cause you cant make aliving farming your trying to push me out of the engine machining buisness with made up lies. ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: wi50
Date Posted: 06 Mar 2013 at 11:12am
|
Are you refering to a prominent rod and rocker manufacturer for the antique tractor pulling arena? Small engine? Automotive? ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mlpankey
Date Posted: 06 Mar 2013 at 11:24am
|
Wouldnt you like to know.its making you sweet thinking its yours isnt it. Not saying. I do buy some of my competitions stuff to have a quality check up on . ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: wi50
Date Posted: 06 Mar 2013 at 11:34am
Well I don't manufacture and sell rocker arms, so it's not me. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: Glockhead SWMI
Date Posted: 06 Mar 2013 at 11:57am
| Here we go... again... |
Posted By: Rod B
Date Posted: 06 Mar 2013 at 12:19pm
|
at least spankey considers you a "prominant manufacturer" Marty. ------------- for the money there is nothing better than provoking idiots and posers |
Posted By: Larry W.
Date Posted: 06 Mar 2013 at 12:25pm
Panky code meaning he has no idea what the hell he's doing so he needs to buy someone elses parts to figure it out and then trash whoever he bought from when he can't replicate what has been done. |
Posted By: mlpankey
Date Posted: 06 Mar 2013 at 12:28pm
|
Rod i consider marty a flunky .the leader of monkeys ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: cranky
Date Posted: 06 Mar 2013 at 12:42pm
| i do not believe 4340 material can be annealed to a level of rockwell "C" scale of 20. industry standards consider 24 to be lowest attainable |
Posted By: wi50
Date Posted: 06 Mar 2013 at 2:25pm
Thus the reason I was asking for proof from our village idiot. He's lucky he picked 20 out of thin air. He could have sounded slightly more intelligent had he mentioned the scale, HRB, HRC, etc.
Next time rember to cite your sources, provide proof and give a unit of measurement pankey. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: mlpankey
Date Posted: 06 Mar 2013 at 2:37pm
------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: Ihateillinoisnazis
Date Posted: 06 Mar 2013 at 2:50pm
http://www.interlloy.com.au/data_sheets/high_tensile_steels/4340.html" rel="nofollow - http://www.interlloy.com.au/data_sheets/high_tensile_steels/4340.html There ya go hillbilly, get an education. Did anyone say Rockwell 24C was being used for connecting rods? Cranky was saying 24c is the lowest you will see 4340 on the Rockwell C scale you dope. |
Posted By: mlpankey
Date Posted: 06 Mar 2013 at 2:57pm
|
quote your link (generally supplied )still not hard enough for all out performance connecting rod. like i said 90,000 psi yeild strength c scake 18. If it files easy oldtime machinist trick its less than 40c ------------- people if they don't already know it you can't tell them. quote yogi berra |
Posted By: Ihateillinoisnazis
Date Posted: 06 Mar 2013 at 3:11pm
You're a total idiot. Why does eagle, scat, and summit all supply performance rods made out of 4340?? Please tell us they are doing it all wrong. |
Posted By: mlpankey
Date Posted: 06 Mar 2013 at 3:26pm
|
well their 4340 intermediate performance rods check in the 30s for hardness and the $1000.00 and up higher performance level 4340 rods have no lower than a 41c hardness. Idiots dont compare to know the difference . They think one and all is the same . as stated in a rod rebutile they are about 15 different hardness of 4340. This is why their rods are sugested and limited to hp output . Really it should be rpms but In most car application hp goes up with rpms . ------------- people if they don't already know it you can't tell them. quote yogi berra |