getting into pulling
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=63398
Printed Date: 23 Nov 2024 at 8:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: getting into pulling
Posted By: CAL(KS)
Subject: getting into pulling
Date Posted: 17 Jan 2013 at 5:32am
|
My brother and I are wanting to get into pulling and have a couple tractors we would like to setup to pull. Between the two of us we have probably 5 hooks, on a stock tractor, lol
Since we arnt even really started yet, I was interested in some input on this:
http://www.antiquetractorpullguide.com/" rel="nofollow - http://www.antiquetractorpullguide.com/ Is the guide worth the money for a couple NOOBS? Seems like a smart thing to get was wondering if anyone has it, and what their thoughts are? We dont have anyone nearby that pulls, for us to learn from. We are anxious to get started.------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Replies:
Posted By: Butch(OH)
Date Posted: 17 Jan 2013 at 6:50am
| A person needs to have reasonable expectations from such guides. If you think it will tell you to twist bolt A a couple turns and put a weight here or there and run this tire and you will be in the top three every week I'd guess you will be disappointed. I haven't pulled myself for 20 years now but dirt tracked for years and drag raced prior to that and both sports had guides written with similar approaches. Very likely some good basic information in it that will keep you from heading out into left field as you get started and thus getting embarrassed at the track but you will still have to live and learn. For $20 I'd give it a look if I was where you are. |
Posted By: Rod B
Date Posted: 17 Jan 2013 at 6:57am
|
Lots of good info on here. Ask questions, ask for pictures for ideas and take advice from several good forum members. Just don't take advice from one certain keyboard commando. ------------- for the money there is nothing better than provoking idiots and posers |
Posted By: The Other Orange
Date Posted: 17 Jan 2013 at 7:57am
| I wouldnt waste my money on it. Most guys and gals dont win right away it just takes seat time. Look at what the winning ACs around you are doing as far as hitches/weight brackets and weight placement. Ask questions most guys will tell you what there doing. Tires are so important in the 3-4mph classes. |
Posted By: wi50
Date Posted: 17 Jan 2013 at 11:53am
|
Best thing to do is to find out the rules for your area and pulls you will be attending. If you're going for a class with stock type tire sizes and 3 mph speed limit, stock drawbar, then do your engine and chassis mods according, meaning verry little.
If you can or wish to run any gear, 20% over RPM then be prepared to drop some cash but with 5 hooks under your belt so far then I'd worry about finding some decent tires and rims, getting a decent adjustable hitch made and weight brackets. Biggest thing is to try and do your upgrades so you don't have to do it over when you decide to move up.
What tractor are you starting with? Ask and look around at some ideas for weight brackets and an adjustable hitch.
Good pull comeing up in Lincoln Ne. for you Kansas guys. Cornhusker Classic. It may be wise to attend and look at a few tractors and talk to some pullers weather you're thinking of something like a NATPA DIV 2 which is pretty stock, div 3 is fun, 4 and 5 are pretty spendy and tough. I went down there last year, great facility and large amount of tractors. ------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: Charlie175
Date Posted: 17 Jan 2013 at 1:12pm
|
I have the Guide and it was interesting but it didn't tell me anything that I didn't know. I do like the gear/speed/power listing for most antique tractors, it really shows what you *should* be up against. His monthly emails are interesting also. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: AC200Puller
Date Posted: 17 Jan 2013 at 4:31pm
| What are you starting with for a tractor? Let us know and we can get you started , just remember it isn't something that just happens you will be changing for years before you will have it where you want to be. Its a great sport! Get out the wrenches and get going on it! |
Posted By: DrAllis
Date Posted: 17 Jan 2013 at 5:00pm
| Set-up your front and rear weight brackets so they use the same style of weight on both ends of the tractor. If you don't do this, you'll someday remember reading this post. |
Posted By: CAL(KS)
Date Posted: 17 Jan 2013 at 8:01pm
|
well thank you for all the input. I plan on asking plenty of questions, but i also love to scour archives and olds posts here and on YT. i usually search for a while before i ask a question. I have been downloading pics of weight brackets and hitches.
We will be pulling NATPA div 2 and 3. That is what the club we will pull with uses for rules, not planning on touring the country for NATPA points lol. so nothing too wild. We plan on a cam grind and a few more cubes. Im sure well stay under 300 as we arnt interested in doing extensive block modifications. I am curious as to what your opinions are as to how much motor to build for div 2-3?
My brother bought a 37 WC we will be picking up this weekend. It was a puller/project someone started, from what i can tell the only thing done is 14.9-28 rears on pressed steel. otherwise looks to be stock, so we'll be starting from scratch.
Eventually I want to pull with my 37 UC but we will probably build the WC first and try to learn a few things.
 ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: 2wise4agm
Date Posted: 19 Jan 2013 at 12:03pm
| I can't help you on the division II rules or motor, but I will put in my .02. I started last year with my 190 and I didn't watch or pull near enough before starting on my tractor. Now I'm finding that I'm wanting to change my tires, hitch, weight brackets, etc because I didn't know enough the first time around. I wanted to be competitive right out of the gate, and I should have just been paying attention to everyone else and soaking up info. But it is one of the most enjoyable things I've ever done, and most of the pullers are great people and will help out another puller if they can. |