BRAKES A/C FL40 FORKLIFT
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=62818
Printed Date: 27 Jun 2025 at 4:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: BRAKES A/C FL40 FORKLIFT
Posted By: JRM914
Subject: BRAKES A/C FL40 FORKLIFT
Date Posted: 07 Jan 2013 at 11:49am
|
i NEED SOME HELP I REPAIRED THE ENGINE ON THIS FORK LIFT IT RUNS SWEET OWNER IS SO HAPPTY HE WANTS ME TO FIX THE BRAKES. i HAVE A PARTS MANUAL NO SERVICE MANUAL CAN ANY ONE HELP ME WITH GETTING THE BRAKE DRUMS OFF OR WHAT IS NECESSARY TO GET AT THE BRAKE SHOES? I HAVE PULLED THE SPINDAL NUT OFF AND REMOVED THE OUTER BEARING THE WHEEL MOVES A LITTLE BUT NOT MUCH ANY HELP WOULD BE GREAT
|
Replies:
Posted By: Mrgoodwrench
Date Posted: 07 Jan 2013 at 5:00pm
you'll have to adjust the brakes down...cant remember which type of adjuster you have ...there will be a hole in the backing plate or a hole in the drum...hole in backing plate may look like a drum bung
-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
Posted By: Mrgoodwrench
Date Posted: 07 Jan 2013 at 7:27pm
with a full modle and ser.# i might be able to get pics at work we were a dealer for the ac's and still have the microfilms
-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
Posted By: Mrgoodwrench
Date Posted: 08 Jan 2013 at 5:25pm
ok i did a little looking at work today, you truck has "slide bar" brake adjusters. there should be 2 slots in the backing plate, one on each side. you should be able to use a large screwdriver in those slots to compress the slide. when you pull the drum be carefull it has a bull gear in it and will be very heavy. once the drum is off you will see a tin grease shield covering the brakes it unbolts easily. the brakes are pretty basic after that. you didn't say what the brake problem is but if it is a low pedal especially on the first presss of the pedal then those adjusted bars could be the problem. if you do any work i would recomend replacing them.
-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|