Pulling Forum - Front axle

Print Page | Close Window

Front axle

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=62587
Printed Date: 23 Nov 2024 at 5:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Front axle

Posted By: gcalent
Subject: Front axle
Date Posted: 03 Jan 2013 at 1:01pm

Does anyone make a light weight wide front axle assembly for a puller? I can adapt it to my application, just looking for the axle with spindles and hubs. I saw an article I think it was in Hook about someone that was making them, but as usual you can never find something when you want it.

-------------
Pullin With AC

Replies:

Posted By: ACFarmer
Date Posted: 03 Jan 2013 at 5:11pm

What tractor do you have?

-------------
Making A living everyday farming with and working on Allis Equipment

Posted By: gcalent
Date Posted: 04 Jan 2013 at 5:26am

Building a d17 with a 301

-------------
Pullin With AC

Posted By: ACFarmer
Date Posted: 04 Jan 2013 at 10:13am

Depends on how good you are at welding I suppose. On my 210/8070 I used a 190 wide front and made my own bolster. On something like a D17 it shouldnt be too hard to make a wide front and just use spindles from anything you can scrounge up that are light.

-------------
Making A living everyday farming with and working on Allis Equipment

Posted By: gcalent
Date Posted: 04 Jan 2013 at 10:17am

Thanks, I can fab almost anything, sometimes it`s easier not to reinvent the wheel if someone has already done it.

-------------
Pullin With AC