4BT in a WD
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=60651
Printed Date: 23 Nov 2024 at 9:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 4BT in a WD
Posted By: dgerth
Subject: 4BT in a WD
Date Posted: 27 Nov 2012 at 8:59am
|
New guy here with a ?. Does any one know what it would entail to put a cummins 4BT in a WD? It's probably been done by someone on this fine site who would know the pitfalls if this were possible. tks, in advance, dg
|
Replies:
Posted By: Honey B
Date Posted: 27 Nov 2012 at 9:12pm
| I'm go to find out soon. Currently in the process of putting a 4bt in a WD. The adapter plate is made flywheel and clutch is almost ready. Looking to pull 3rd or 4th gear with 18.4x34s. I'm thinking about 4000lbs. |
Posted By: DrAllis
Date Posted: 28 Nov 2012 at 6:34am
| What Club or Organization would allow a "homemade" tractor like that to even compete??......none where I live.....maybe a "courtesy hook" at best. |
Posted By: Honey B
Date Posted: 28 Nov 2012 at 5:00pm
|
I'm sure if you could put on good show most place's would let you pull. I've not got rich pulling yet so let's have some fun. I've heard alot of chatter about other wanting to do the same. |
Posted By: 2wise4agm
Date Posted: 28 Nov 2012 at 10:50pm
There is a small group here in Missouri that have a "repower farm" class for tractors just like that. I'm not sure how long it will last though. VERY few tractors pull in it. |
DrAllis wrote:Posted By: dgerth
Date Posted: 28 Nov 2012 at 10:56pm
|
Fun? of course fun would enter into it! I'm not puling for the plastic trophy. I have a neighbor who pulls Olivers and I want to "best" him if I can with Orange! A friendly rivalry of course. The 226/201 path is getting hard to follow, parts are getting hard to find and was looking for an alternative. Like you said, just for fun? DEFINITLY!! dg PS, will it work?, and how to accomplish?
|
Posted By: Larry(OH)
Date Posted: 29 Nov 2012 at 5:14am
|
I want pictures when your done!!! Can you say Brush pulling baby!!!!!!!!!! ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: Honey B
Date Posted: 29 Nov 2012 at 6:39am
| The WD I pull at Dale's OPOP broke the front main from the outside over the top and back down. To build another engine is $$$$. It was a 4.520''x 5.5'' fun but still a MPH tractor I want something more. |
Posted By: Nick So. IN.
Date Posted: 03 Dec 2012 at 2:38pm
| Shoot, just go ahead and go with a 5.9. lol There is an Oliver Super 88 that runs in a 4,500 lb class here, he has a CR 5.9 in it, said its around 900 horse. |
Posted By: Honey B
Date Posted: 04 Dec 2012 at 7:14pm
| I think the power to drivetrain ratio would be wrong with a 5.9 Cummins. 5.9 weighs a third more also. |
Posted By: CTD03
Date Posted: 05 Dec 2012 at 9:20pm
|
a local guy is running a cockshut with a cr5.9. Not sure what the number is on the tractor. I may have to stop in and take a look. ------------- 1961 D17 (sold)1968 190xt |
Posted By: ALLISMAN32
Date Posted: 06 Dec 2012 at 10:32pm
| If you're not cheating the rules some you're probably not competing! Let er smoke honey b and have some fun. I'm sure international was planning on installing those big truck engines in their 560's from the factory and oliver just had'nt quite got around to putting the threaded spark plug holes in their 12 port cross flow heads for the 88's but they would have, without a doubt if cummins would of had their b series engines available when wd's and 45's and D-17's were being produced they would not have used those lackluster Buda diesel engines. |
Posted By: AC Billy
Date Posted: 27 Jan 2013 at 11:41am
| I am interested in this setup as well, does anyone have a pic of the WD/Cummins repower setup ...or progress pics ? |
Posted By: Honey B
Date Posted: 30 Jan 2013 at 5:59pm
| I have the engine mounted in the tractor with a triple disk clutch. Now working on fenders and a stronger set of wheelie bars. The engine looks like it belongs. The timing cover and turbo hang out a little bit. The Cummins is a little bit shorter engine. Would show photos, but camera not working. Maybe I can get some of my good friends to come over and post them. Should be fun when it gets warm! |
Posted By: AC Billy
Date Posted: 05 Feb 2013 at 11:49am
Be sure to keep us posted ! |