516 ENGINE in D 21 questions
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=58888
Printed Date: 23 Nov 2024 at 6:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 516 ENGINE in D 21 questions
Posted By: DarrylinWA
Subject: 516 ENGINE in D 21 questions
Date Posted: 25 Oct 2012 at 12:19am
|
Might have the chance to buy a 516 out of a N 7. Cheap, runs good, P Pump and about 280 HP. Question is, who is running this engine out there and what type of power can I get? I am thinking a 3x3 turbo and ? Will put in my D 21 "Destination Unknown" tractor Any comments or who to talk to would be great. Darryl Krause in Lynden WA. 360 393 7760 cell. ------------- B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling. |
Replies:
Posted By: Nick So. IN.
Date Posted: 25 Oct 2012 at 2:40pm
| I talked to a guy in Missouri about this, said he had experience doing it, and had a bored block and stroked crank for one. pm me, I think I might still have his number. |
Posted By: BRYAN H
Date Posted: 25 Oct 2012 at 3:34pm
| HOW DID IT RUN??? |
Posted By: DougG
Date Posted: 25 Oct 2012 at 6:58pm
| One fella i kno in Mo had one in a 21 and it ran great till it split the block! ! If your going to do this, make sure the club your going to pull with is ok with a 516 , it wasnt factory! ! And set up right run real good! |
Posted By: Larry(OH)
Date Posted: 26 Oct 2012 at 6:37am
|
Check with a guy named Larry Karlen in Louisville Oh. he runs them in the OSTPA. It is an approved engine to use and seems to be doing OK. I do not have his ## handy, but I know he can help you out. ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: Larry(OH)
Date Posted: 26 Oct 2012 at 6:37am
|
Sorry, That's GARY karlen ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: BurtIA
Date Posted: 26 Oct 2012 at 9:11am
|
Jerry in KS has/had a D21 with a 516 in it. Saw it a few years ago. Used to post on here although I haven't seen him in awhile. Ran the Agco dealship in western KS although I cannot remember the name of the town. Old and forgetful, what can I say. Burt
|
Posted By: Calvin Schmidt
Date Posted: 29 Oct 2012 at 9:00pm
|
There was a D-21 with a 516 at the GOTO in Ohio in July. ------------- Nothing is impossible if it is properly financed |
Posted By: Wayne W
Date Posted: 03 Nov 2012 at 10:12pm
|
I have the same engine but is cubed up to 601 cubes with a 3x3 turbo. There's a picture of it on my website: http://www.guillotineaccessories.net" rel="nofollow - www.guillotineaccessories.net |
Posted By: DarrylinWA
Date Posted: 04 Nov 2012 at 1:00am
|
Talking to Gary. Thanks for the heads up. Take care, Darryl  ------------- B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling. |