couple more wc carb questions...
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57618
Printed Date: 24 Aug 2025 at 6:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: couple more wc carb questions...
Posted By: Glockhead SWMI
Subject: couple more wc carb questions...
Date Posted: 29 Sep 2012 at 9:40pm
|
So I tore into my wc 7078c carb tonight. I have a couple questions. I believe it is the idle jet that has problems. I can not get carb cleaner or compressed air to pass through it. The one end of the jet is sealed. Is that normal? it has one other hole in the side close to where it screws in. Also, near the idle air screw, there appears to be an air bleed that goes through the throat of the carb and terminates right above the throttle plate. Should that be clear as well? I'll post pics tomorrow as I'm sure a picture will be better than my horrible description. Hope it runs tomorrow. |
Replies:
Posted By: acwdwcman
Date Posted: 01 Oct 2012 at 8:39am
|
yes a picture would help ------------- wd with a freeman model 90 trip loader, wd45, 38 unstylled wc, b 10 garden tractor and 2-14 ac trip plow. grandpa has a 56 wd45. wd. allis chalmers snap coupler blade and 3 bottom snap coupler plow |
Posted By: Glockhead SWMI
Date Posted: 01 Oct 2012 at 9:40am
|
Posted By: Glockhead SWMI
Date Posted: 01 Oct 2012 at 9:46am
|
Posted By: Glockhead SWMI
Date Posted: 01 Oct 2012 at 9:51am
 This is the jet. The tube is sealed at the top. |
Posted By: Glockhead SWMI
Date Posted: 01 Oct 2012 at 8:38pm
| Hope to have this running this weekend. |