Farm Equipment - bolts for wheel weights

Print Page | Close Window

bolts for wheel weights

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55788
Printed Date: 22 Sep 2025 at 9:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: bolts for wheel weights

Posted By: ALHO
Subject: bolts for wheel weights
Date Posted: 24 Aug 2012 at 9:18am

I picked up wheel weights fore my d17 yesterday at Portland
What size and length do I need?

-------------
CA WD D15 D15 series2 D17 D17
185 Gleaner R52 D10 D12 D14

Replies:

Posted By: Dave (NE)
Date Posted: 24 Aug 2012 at 1:51pm

well, if you are talking the one piece rear wheel weight that will also work on the WD/WD45, they are 3/4" x 3 1/2". If they are the pie type four section weights for each wheel, I believe they are 3/4" x 6".

Posted By: ALHO
Date Posted: 24 Aug 2012 at 2:17pm

Thanks one piece weigh are they carriage ?
Bolts?

-------------
CA WD D15 D15 series2 D17 D17
185 Gleaner R52 D10 D12 D14

Posted By: Dave (NE)
Date Posted: 24 Aug 2012 at 2:31pm

Yes, carriage bolts. I believe the one piece weights weigh around 135#. Have fun mounting them. Dave

Posted By: ALHO
Date Posted: 24 Aug 2012 at 3:33pm

Thanks i am 63 i will have my boys help I will use 773 bobcat with pallet forks thanks again

-------------
CA WD D15 D15 series2 D17 D17
185 Gleaner R52 D10 D12 D14

Posted By: Allis dave
Date Posted: 27 Aug 2012 at 7:40am

I just added some more one piece weights to my 45 over the weekend. The length stated before are correct but I thought I'd add that for each additional weight you add 2.5" of bolt length. I put a bale spear through the center of mine.