Now my question is what recomendations do I have for making some style of custom mounts that will allow for terrain following but still be solid enough on the tractor to not break anything if a bump or root or something is hit. I want to stay with a belly mount, not a 3-point. I was thinking about a 4 link dropped down from the engine side rails rather than a low slung pusher style like on the Woods decks. I'm no big fan of pushing something with that much side load.

I will also need some type of belt sheave to bolt up to the pto shaft to drive a belt. Preferably a double groove with enough diam. to gain some gear ratio before going to a shaft towards the gearbox.