Print Page | Close Window

8765 Agco

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54162
Printed Date: 27 Sep 2024 at 4:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 8765 Agco
Posted By: bigbird
Subject: 8765 Agco
Date Posted: 24 Jul 2012 at 11:26pm
Seems that the front wheel assist does not shift out when the switch is moved.  The light on the dash goes out, but still seems to pull and crab when steering.  Where should I start?  Will check switch in AM. Would there be a solenoid stuck a something like that?  Thanks



Replies:
Posted By: bigbird
Date Posted: 25 Jul 2012 at 7:21am
up


Posted By: Dale-OH
Date Posted: 25 Jul 2012 at 7:37am
Does it always act like it is engaged?  It is spring applied, and pushes oil to it to disengage it.  So even though the light works, the solenoid could be plugged or stuck and not letting oil flow to release the clutch.


Posted By: 7060
Date Posted: 25 Jul 2012 at 12:09pm
I don't know if its the same, but the Genesis tractors default to engaged when the solenoid isn't working. In other words the solenoid requires power to disengage it. If its the same it may be a bad wire or solenoid.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net