Print Page | Close Window

Ca pto lever engage seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50162
Printed Date: 09 Jul 2025 at 6:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Ca pto lever engage seal
Posted By: Erik from Wi
Subject: Ca pto lever engage seal
Date Posted: 06 May 2012 at 9:20pm
Trying to rebuild my pto unit on my 53 ca. I have replaced all the seals and gaskets in the housing. I ordered all the parts but that seal in no longer avaiabile through agco. So my dealer sent a washer but it was to small to fit over the 3/4 shaft. I called back and had them sent one that was the right shaft size. Well to say the least it's been almost two weeks and no washer yet . Does anyone know of anything else to use like a rubber flat o ring? I need to get this thing back together so I can mow. The problem is I want to fix it right so I dont have to pull it offf the tractor again to fix.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net