Print Page | Close Window

Spark Plug Wires

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50076
Printed Date: 23 Aug 2025 at 6:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Spark Plug Wires
Posted By: Gary
Subject: Spark Plug Wires
Date Posted: 05 May 2012 at 6:07am
Any one have the NAPA  P/N  for Spark Plug wires for D-12 and D-15.
 
Visited my local NAPA store with Allis P/N's for ignition tuneup -
and he tells me he can't get Spark Plug Wires !!
 
Gary



Replies:
Posted By: 79fordblake
Date Posted: 05 May 2012 at 7:05am
Do you have a Tractor Supply nearby? You can get a universal set of copper core wires there and cut to length. They are good wires I use them on all my tractors.


Posted By: B26240
Date Posted: 05 May 2012 at 7:17am
I have bought wire kits with wire centers at my local NAPA store but have to cut them to the right length and put ends on. That said the srevice varies depending on the counter person , If I need a bearing or seal and don't have the number I go straight to Rodney who knows where the right book is -- others just give up .


Posted By: Gary
Date Posted: 05 May 2012 at 9:05am
OK thanks guys.
 
Yes Blake we have a TSC as well.
 
Got to go to NAPA to pick up the 295's, I will see about the plug wire kit there.
 
Gary


Posted By: Steve in NJ
Date Posted: 05 May 2012 at 9:19am
We build custom sets for the "D" series all made up and you don't have to cut anything. Just install em'. They are numbered for each cylinder, and have our Orange Hy-Heat Silicone spark plug boots on them. Drop us a line if interested...
mailto:Steve@B&B" rel="nofollow - Steve@B&B


Posted By: Gerald J.
Date Posted: 05 May 2012 at 3:05pm
Marine engine shops keep copper ignition wire on hand too.

Gerald J.


Posted By: Bill_MN
Date Posted: 06 May 2012 at 9:34pm
not to hijack your post, but is it true that you should use spiral (carbon) core wires with electronic ignition?

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow


Posted By: Tracy Martin TN
Date Posted: 06 May 2012 at 11:02pm
Originally posted by Steve in NJ Steve in NJ wrote:

We build custom sets for the "D" series all made up and you don't have to cut anything. Just install em'. They are numbered for each cylinder, and have our Orange Hy-Heat Silicone spark plug boots on them. Drop us a line if interested...
mailto:Steve@B&B" rel="nofollow - Steve@B&B
 Best wires I ever got. Got them for my D series and G's. Can't go wrong with Steve's wires. JMHO Tracy Martin

-------------
No greater gift than healthy grandkids!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net