will this work?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49812
Printed Date: 28 Sep 2024 at 11:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: will this work?
Posted By: darrel in ND
Subject: will this work?
Date Posted: 29 Apr 2012 at 10:21pm
|
I kind of touched on this idea once before with no real for certain response, but will a power shift transmission out of an 8050 go into a 7580, semi feasibly? I do know that anything is possible with enough time and money throwed at it, but I am mostly wondering about the basic bolt up. I know that shifting cables and such would be an issue, which I think could be resolved by raiding a 2wd 7000 series powershift, but other than that would dimensions and bolt patterns be the same? As far as it holding up to the load, I wouldn't worry about that, because the only thing it would be doing is either pulling a planter or a sprayer, neither of which would work it hard, but a power shift would be nice for. Reason I ask, is I have a 7580 with the transmission out of it and a burned up 8050 that the power shift should be all right yet. Any thoughts? Thanks, Darrel
|
Replies:
Posted By: darrel in ND
Date Posted: 30 Apr 2012 at 10:18pm
Posted By: Sam T-Ga
Date Posted: 01 May 2012 at 11:15am
|
it will bolt in, the transmission housings had same bolt patterns , linkage will need to be worked out.
|
Posted By: darrel in ND
Date Posted: 01 May 2012 at 4:17pm
Posted By: Dave in il
Date Posted: 01 May 2012 at 5:27pm
If you get that puppy together make post about it, and take pictures while your at it please.
-------------
AGCO My Allis Gleaner Company
|
Posted By: darrel in ND
Date Posted: 01 May 2012 at 9:39pm
|
It'll have to be next winter's project. If it works out, it should be a sweet spraying tractor. Darrel
|
|