Model C Hydraulics Help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49626
Printed Date: 22 Aug 2025 at 1:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Model C Hydraulics Help
Posted By: tiny elvis
Subject: Model C Hydraulics Help
Date Posted: 26 Apr 2012 at 9:58am
| I am trying to finish my 49' C restoration, and the last thing is the hydraulics. All I have is a cylinder and handle that attaches to the pump. Do I need a valve of some sort ? What does the line hookup to? I just cant figure out what lets off the pressure if the line is hooked up directly to the pump? |
Replies:
Posted By: wfmurray
Date Posted: 26 Apr 2012 at 11:44am
| When you move handle atachefd to pump it will give you three positions , lift -hold - lower .When in lower position weight of implement pushes oil back through pump to resovior. before taking pump apart flush with a solvent and reprime with oil . It may save you a disamble. |
Posted By: CTuckerNWIL
Date Posted: 26 Apr 2012 at 11:55am
|
The valve is built into the pump and the handle attaches to the valve.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: tiny elvis
Date Posted: 26 Apr 2012 at 1:42pm
Thanks! That is what I was hoping, but I wasen't sure. You guys have helped me alot on this tractor, thanks for all the good advice!
|