WD 45 Single Wheel & Gearboxs
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48784
Printed Date: 26 Aug 2025 at 8:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD 45 Single Wheel & Gearboxs
Posted By: Ray
Subject: WD 45 Single Wheel & Gearboxs
Date Posted: 10 Apr 2012 at 7:57pm
2 complete gearboxes and single wheel. I will sell whatever you need. Call with questions 785-353-2392.
 |
Replies:
Posted By: WD45
Date Posted: 10 Apr 2012 at 9:04pm
|
Tire size that was used on the single wheel. ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: MNLonnie
Date Posted: 10 Apr 2012 at 9:09pm
|
Should be 9.00X10. ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Eldon (WA)
Date Posted: 10 Apr 2012 at 9:51pm
------------- ALLIS EXPRESS! This year: |
MNLonnie wrote:Posted By: BILLP-SE-MI
Date Posted: 11 Apr 2012 at 10:39am
|
M.E. miller tire
900-10 3 rib $250
900-10 rib implt $170
tube $24
|
Posted By: TimNearFortWorth
Date Posted: 11 Apr 2012 at 11:48am
| And don't even try to dissassemble anything on the rim components without letting ALL of the air out . . . . . |
Posted By: Fields
Date Posted: 11 Apr 2012 at 11:58am
| Well where are you located and how much for a gear box? Don't need the single front wheel set up. |
Posted By: MNLonnie
Date Posted: 11 Apr 2012 at 4:14pm
|
Am I correct in saying that gear box is the same for a single front and a 3 bolt wide front? Ray is in NE Kansas. ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: BILLP-SE-MI
Date Posted: 11 Apr 2012 at 6:24pm
| Lonnie the front gear box are the same. You just unbolt the cast part the tie-rods bolt to on the bottom plate, then bolt the fork on. |