Print Page | Close Window

417 Loader question?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47676
Printed Date: 28 Aug 2025 at 4:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 417 Loader question?
Posted By: 1953CA
Subject: 417 Loader question?
Date Posted: 21 Mar 2012 at 12:09pm
Will a 417 loader from a D17 series IV fit on a D15 Series II or are the mounting brackets different?  And how much are they worth?
 
Andrew 


-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"           



"No Air Support without Ground Support"



Replies:
Posted By: Gary
Date Posted: 21 Mar 2012 at 4:39pm
If it is an original Allis loader on a Series IV, it is more apt to be the 500 series;
no front pump, no oil reservoir in loader frame, no hydraulic control valves on loader boom.
 
Gary


Posted By: 1953CA
Date Posted: 21 Mar 2012 at 5:23pm
It has a 417 sticker on it, and no front pump or controls which was run off the D-17.  Reservoir is in the left up-right.  So without the controls and front pump, what would it be worth? 

-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"           



"No Air Support without Ground Support"


Posted By: Gary
Date Posted: 21 Mar 2012 at 5:33pm
If  in decent shape  with no weld patches etc, around 800 to 1,000.
 
To mount on a D-15 ( if it will fit ) you will need the front mounted pump
and  two double acting hydraulic valves and all necessary hoses.
 
Gary


Posted By: 1953CA
Date Posted: 21 Mar 2012 at 11:38pm
I see now that a 415 will fit a D-15, mounting brackets are different.  Would anyone be interested in a 417 loader for a D-17???

-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"           



"No Air Support without Ground Support"


Posted By: CTuckerNWIL
Date Posted: 22 Mar 2012 at 8:28am
Originally posted by 1953CA 1953CA wrote:

I see now that a 415 will fit a D-15, mounting brackets are different.  Would anyone be interested in a 417 loader for a D-17???

I would if it wasn't too far out of my area in NW IllinoisSmile


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net